Abstract:China's 2022 crude steel production soared to an impressive 1.018 billion tons, and steel slag constituted approximately 10% to 15% of this massive output. However, a notable hindrance to the comprehensive utilization of steel slag arises from the fact that it contains 10% to 20% of free calcium oxide (f-CaO), resulting in volume instability. To address this challenge, our study delved into the dynamic transformation of the interface between lime and slag, as well as the fluctuations in the dissolution rate of lime. An Electron Probe Micro Analyzer, equipped with an energy-dispersive spectrometer, was employed for the analysis. Our findings revealed that the configuration of the reaction interface between quicklime and slag underwent alterations throughout various phases of converter smelting. At a temperature of 1400 °C, several significant transformations occurred, including the formation of a CaO-FeO solid solution, (Ca, Mg, Fe) olivine, and low-melting point (Ca, Mg) silicate minerals. With the gradual reduction in FeO content, a robust and high-melting 2CaO·SiO2 layer emerged, generated through the interaction between CaO and (Ca, Mg, Fe) olivine. Furthermore, for lime with a particle size of 20 mm and a calcination rate of 0%, the thickest layer of 2CaO·SiO2 was observed after 120 s of dissolution in slag A2 at 1400 °C. Overall, the dissolution rates of lime with different particle sizes in slag A1 to A4 showed a gradual increase. On the other hand, the dissolution rates of lime with different calcination rates in slag A1 to A4 exhibited an initial increase, followed by a decrease, and then another increase. The formation of a high-melting point and continuous dense 2CaO·SiO2 layer during the dissolution process hindered the mass transfer between lime and slag.

Dissolution Thermodynamics Analysis of CaSiO3 in the System of CaSiO3-NH3-NH4Cl-H2O

Thermodynamic Modeling of CaSO4–(NH4)2SO4–NH3–H2O Quaternary System with Asymmetric E-NRTL Model

Dissolution Thermodynamic Analysis of Calcium and Magnesium in Mg(Ⅱ)-Ca(Ⅱ)-NH3-CO2-3-SO2-4-H2O System

The Conversion of Calcium-Containing Phases and Their Separation with NaCl in Molten Salt Chlorinated Slags at High Temperature

Dissolution of CaO in SiO2-CaO-Al2O3 Slag in Si Production

Influences of Citric Acid on the Metastability of Α-Calcium Sulfate Hemihydrate in CaCl2 Solution

Clarification Of The Dissolution Of Solid Cao And The Phosphorus-Enrichment Capability Of Calcium Silicates In The Multiphase Slag Based On The Ion And Molecule Coexistence Theory

Phase Diagrams of the MgSO4-Al2(SO4)3-(NH4)2SO4-H2O System at 25 and 55 °C and Their Application in Mineral Carbonation

Research on selective leaching of calcium from steel-making slag with NH 4 Cl as leaching solution

Dissolution Mechanism and Computational Model for Controlling Dissolution Rate of Alumina Particles in CaO–SiO2–Al2O3–MgO Slag

Kinetics of Iron Removal From Ti-Extraction Blast Furnace Slag by Chlorination Calcination

Thermodynamic analysis on the dissolution equilibria of MgCO3((s)) in the system of Mg(II)-NH3-CO32--SO42--H2O

Thermodynamic analysis on the dissolution equilibria of MgCO3(s) in the system of Mg(II)-NH3-CO3 2--SO 4 2--H2O

Thermodynamic Analysis on Reaction Behaviors of Silicates in (NH4)(2)WO4-(NH4)(2)CO3-NH3-H2O System

Leaching Calcium from Phosphogypsum Desulfurization Slag by Using Ammonium Chloride Solution: Thermodynamics and Kinetics Study

Separation of Metal Impurities from Metallurgical Grade Silicon Via Cao-Sio2-Caf2 Slag Treatment Followed by Leaching with Hydrochloric Acid

Study on the Dissolution of Calcium Sulfate

Behavior of Calcium Silicate in Leaching Process

Leaching Kinetics and Dissolution Model of Steel Slag in NaOH Solution

Dissolution of Al2O3–C bricks in 45 wt% CaO-45 wt% SiO2-x wt% CaF2-(10-x) wt% Na2O slag

Dissolution Behavior of Lime with Different Properties into Converter Slag