Abstract:The study focuses on the development of polyoxymethylene (POM)/poly(lactic acid) (PLA) blends with increased impact and thermal resistance. The study was conducted in two phases; in the first part, a series of unmodified blends with PLA content of 25, 50, and 75 wt.% was prepared, while the second part focused on the modification of the PLA/POM (50/50) blends. An ethylene/butyl acrylate/glycidyl methacrylate terpolymer (E/BA/GMA) elastomer (EBA) was used to improve the impact strength of the prepared blends, while reactive blending was used to improve interfacial interactions. We used a multifunctional epoxy chain extender (CE) as the compatibilizer. Static tensile tests and notched Izod measurement were used to evaluate the mechanical performance of the prepared samples. The thermomechanical properties were investigated using dynamic mechanical thermal analysis (DMTA) analysis and heat deflection temperature (HDT)/Vicat softening temperature (VST) methods. The crystallinity was measured using differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXS) measurements, while the rheology was evaluated using a rotational rheometer. The paper also includes a structure analysis performed using the SEM method. The structural tests show partial miscibility of the POM/PLA systems, resulting in the perfect compatibility of both phases. The impact properties of the final blends modified by the EBA/CE system were found to be similar to pure POM resin, while the E modulus was visibly improved. Favorable changes were also noticeable in the case of the thermomechanical properties. The results of most of the conducted measurements and microscopic observations confirm the high efficiency of the reaction for PLA as well as for the modified POM/PLA mixtures.

STUDY ON MECHANICAL PROPERTIES AND MORPHOLOGY OF POLYOXYMETHYLENE TOUGHENED WITH IONOMERS

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Toughening Mechanism In Polyoxymethlene/Thermoplastic Polyurethane Blends

Toward Supertough and Heat-Resistant Binary Blend: Polyoxymethylene/elastomer Via In-Situ Graft Copolymer Formation During One-Pot Reactive Melt Blending

Toughening mechanism in polyoxymethylene/thermoplastic polyurethane blends

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Morphology Control of Polyoxy‐methylene/thermoplastic Polyurethane Blends by Adjusting Their Viscosity Ratio

Improving the Toughness and Thermal Resistance of Polyoxymethylene/Poly(lactic acid) Blends: Evaluation of Structure-Properties Correlation for Reactive Processing

Joint Effect of Compatibilizer and Organo-Montmorillonite on Compatibilization of Polyamide-6/Poly(Phenylene Oxide) Blend: Morphology and Properties

Crystallization behavior and toughening mechanism of poly(ethylene oxide) in polyoxymethylene/poly(ethylene oxide) crystalline/crystalline blends

Investigation on the mechanical, thermal and electrical properties of polyoxymethylene composites modified by thermoplastic polyurethane elastomer and carbon fiber

Study on synergistic toughening of polypropylene with high-density polyethylene and elastomer-olefin block copolymers under ultrasonic application

Polyoxymethylene/thermoplastic polyamide elastomer blends: Morphology, crystallization, mechanical, and antistatic properties

Morphology and Fracture Behavior of Toughening-Modified Poly(Vinyl Chloride)/Organophilic Montmorillonite Composites

Characterizations and Properties of POM Toughened by Thermoplastic Polyamide Elastomer

Significant Toughness Improvement in Ipp/plla/egma Blend by Introducing Dicumyl Peroxide As the Morphology Governor

Toughening of Polypropylene with Crystallizable Poly(ethylene Oxide)

Preparation and Characterization of Nitrile Butadiene Rubber (NBR)/Polyoxymethlene (POM) Blends Compatibilized by Maleic Anhydride Grafted POM (MAH-g-POM)

Acrylate Elastomer Toughened and Uv Stabilized Polyoxymethylene

Unique impact behavior and toughening mechanism of the polypropylene and poly(ethylene-co-octene) alternating multilayered blends with superior toughness

Study of Hyperbranched Polymer on POM-based Binder in Metal Injection Molding