Application of KBE Technology in Design of Extrusion Die for Aluminum Profile

Liming Peng

2003-01-01

Abstract:KBE technology is applied in the design of extrusion die for aluminum. Every knowledge from multi-source is used to provide various supports to die designer and improve engineering decision efficiency. In the paper aluminum profile, the framework and key technologies of KBE system for aluminum profile die are introduced in detail.

What problem does this paper attempt to address?

UG-based KBE System for the Design of Extrusion Porthole Dies for Aluminium Profile

王彦菊,方刚,吴锡坤,梁奕清

DOI: https://doi.org/10.3969/j.issn.1001-2168.2010.07.016

2010-01-01

Abstract:KBE system was introduced in designing extrusion porthole dies for aluminium profile according to the extrusion characteristic of aluminium profile.A design system of extrusion porthole dies for aluminium profile that embeds engineering experiences based on UG software was developed.The KBE system based on UG NX was developed by VC++,UG/API or UG/GRIP,with practical engineering experiences and expert knowledge as design guidance.In the KBE system,many function modules were built such as parts management information,material analysis,section properties analysis,determination of extrusion process parameters,and structure design,strength check and other geometry dimension design of the extrusion porthole dies.This system is a combination of KBE and CAX and is quite useful for the CAD-based design of extrusion porthole dies for aluminium profile.
Study on Simulation of Stamping Forming and Die Surface Optimization of Aluminum Alloy Plate

Miao Hu,Zhi Qiang Yang,Xiao Lin Cao,Qing Yang,Yu Chen,Xin Li

DOI: https://doi.org/10.4028/www.scientific.net/kem.764.303

2018-01-01

Key Engineering Materials

Abstract:Along with the automobile lightweight development, aluminum has become the focus of its own material characteristics. The aluminum alloy products with high efficiency, high quality and low cost are the guarantee of competitive advantage. High quality die surface is directly related to the product quality, cost, production efficiency, die life and so on. In this paper, the stamping process of two kinds of aluminum alloy products was simulated by Auto Form. The method of setting blank holding force and spring back compensation was introduced. At the same time, the setting of parameters such as die fillet, friction coefficient and draw bead was described in this paper. Finally, the optimization of die surface design was achieved by simulation.
Research on KBE Technology in Stamping Die Design

Chun Liu,Yinghong PENG

DOI: https://doi.org/10.3969/j.issn.1003-5311.2001.01.018

2001-01-01

Abstract:The modern engineering design is an innovative process based on knowledge.KBE technology, which is characterized as the integration of CAD/Cam/CAE/PDM and AI technology, caters for the modern engineering design requirements. This paper issue KBE application in stamping die design, and some key problems of web based KBE in stamping die design are also included.
KBE-Based Mold Cavity Design System

Shao Jian,Ke Yinglin

DOI: https://doi.org/10.3321/j.issn:1003-9775.2006.06.005

2006-01-01

Journal of Computer-Aided Design & Computer Graphics

Abstract:To integrate design information and share knowledge and experience in mold cavity design, knowledge based engineering (KBE) is introduced into the design process. Feature technology and knowledge engineering are fully applied in this system. Feature technology is used to integrate design information in all design phases and knowledge engineering is dedicated to solve the problem of sharing knowledge and experience. A demonstration case is presented to show that KBE can effectively improve the design efficiency of mold cavity and accelerate the process of mold development.
Study on Extrusion Process and Die Design System Based on KBE

Zhao Zude,Gu Junhua,Liu Chuanlin,Huang Shaodong,Chen Jun

DOI: https://doi.org/10.3321/j.issn:1004-132X.2008.06.006

2008-01-01

Abstract:Based on the design concept and method of knowledge based engineering,the extrusion process and die intelligent design system was developed on the platform of UG/NX.Key technologies such as open knowledge base,feature modeling,reasoning algorithms combining case-based reasoning & rule-based reasoning and DFV(design for variety)-based die structure design platform were researched.Especially,the application of RCCR reasoning mode and DFV-aided techniques significantly improve the process and die design efficiency.Design for the selected case was conducted to demonstrate the functionalities.
Key Technologies of "zero Die Trial" Design System for Aluminum Profile Extrusion

C Luo,DY Li,YH Peng,TY Zuo

IF: 3.752

2004-01-01

Transactions of Nonferrous Metals Society of China

Abstract:Aluminum alloy profile parts are widely used in the fields of aviation, equipment, automobile and ornamental industries. The construction method for "zero die trial" intelligent design system of aluminum extrusion die was studied based on KBE idea. An object-oriented knowledge language AEKL(Aluminum Extrusion Knowledge Language) was developed to construct intelligent knowledge model with three methods, frame, parameters and rules. On the aspect of knowledge reasoning, case-based reasoning was employed in addition to traditional rule based reasoning method. API provided by CAD platform was used in geometry disposal. Finally, the corresponding prototyping system was established and an design example was shown.
CAD system of the extrusion dies to produce aluminum profile based on UG system

LIAO Pei-gen,FANG Gang,ZENG Pan,WU Xi-kun,LIANG Yi-qing

DOI: https://doi.org/10.3969/j.issn.1000-3940.2008.04.044

2008-01-01

Abstract:The great requirements for aluminum profile and variety demand higher performance of the extrusion dies as well as the shorter period of design and manufacture.The use of the CAD/CAE/CAM technology can achieve these goals.However,so far there is no CAD system which can be used to design the extrusion dies effectively.A special CAD system which embeds the engineering experience based on the UG software was developed.The system can design the bearing automatically.The finite element analyzes show that the system can improve the quality of the dies and the efficiency of the design.
Design and analysis sofeware system of the aluminum profile extrusion die

闫焕营,于沪平

DOI: https://doi.org/10.3969/j.issn.1000-3940.2004.05.018

2004-01-01

Abstract:According to the analysis of the aluminum extrusion technology and trend of the combination with modern IT technology, the significance of utilizing the design analysis software system of aluminum extrusion is pointed out and works out a corresponding software system on that base. The software had been used well in the production process.
Application of Artificial Intelligence Extrusion Die Model Based on Finite Element Simulation in Decorative Material Aluminum Alloy

Xu Song,Yuan Wu,Yun Wu

DOI: https://doi.org/10.1155/2022/2992479

IF: 1.43

2022-03-30

Mathematical Problems in Engineering

Abstract:At this stage, the varieties and specifications of aluminum profiles continue to increase, and the scope of application continues to expand. The extrusion forming process is the key technology to realize the production of aluminum profiles, and its technological level determines the quality of the profile products and the service life of the mold. However, in actual production, the quality of the die is difficult to guarantee, and it takes multiple die trials and die repairs to produce qualified products. The numerical simulation technology is used to simulate the actual extrusion process, which can track and describe the flow behavior of the metal in real time, reveal the real flow law of the metal, predict the possible defects of the profile during the extrusion process, and adjust the mold structure and process parameters in time. It can not only improve the quality of extruded profiles, but also reduce production costs and shorten the mold production cycle. Based on this, this paper established an extrusion die optimization design model integrating finite element simulation technology and artificial intelligence algorithm. The prediction models were established with the mean square deviation of the section velocity, the maximum extrusion force and the maximum temperature of the section, respectively, and the optimal design of the structure was realized by using the particle swarm algorithm. The experimental results show that the model in this paper can realize the function well, which verifies the validity of the model.

engineering, multidisciplinary,mathematics, interdisciplinary applications
The Knowledge-Based Integrating System for Aluminum Extrusion Die Design

罗超,李大永,周飞,彭颖红,赵震

DOI: https://doi.org/10.3321/j.issn:1006-2467.2003.12.013

2003-01-01

Abstract:The frame of knowledge-based integrating system for aluminum extrusion die design was put forward. Case-based reasoning (CBR) technology and its realization in the construction of general case modeling for aluminum extrusion die design were studied. The simulation method which is faced on the forming process of aluminum extrusion was proposed. The way to deal with the geometry in integrating knowledge model was summarized, and the basic principle to treat the geometry based on CAD platform was put forward. A prototype CBR system of aluminum extrusion die design was built up.
Analysis of Forming of Automotive Drawbar and Design of the Die

LIU Bo,HUANG Xiao-yan,CHEN Wei

DOI: https://doi.org/10.3969/j.issn.1672-0121.2006.06.021

2006-01-01

Abstract:Through the analysis of the technology of forming of automotive drawbar,the method of adopting three suits of simple die structure has been advanced with introduction to structure and operating process.Practice has proved the reasonableness of die structure and long service life of the die.
Optimization of porthole extrusion die for 6063 aluminum alloy profile with thin-walled multi-cavity complex section and analysis of profile performance

Zheng Ma,Xuedao Shu,Haijie Xu,Guobiao Wang,Fei Tong,Zixuan Li,Kai Chen,Guoping Li,Bo Li

DOI: https://doi.org/10.1007/s43452-024-00912-x

IF: 4.042

2024-03-19

Archives of Civil and Mechanical Engineering

Abstract:In the porthole extrusion of complex profiles, the die structure plays a significant role in the formability of the profile. In this study, numerical simulation was conducted to optimize the porthole extrusion die for a complex cross-sectional profile, with the standard deviation of velocity (SDV) as the evaluation criterion. The optimization involved the introduction of pseudo-mandrels, adjustments to the shape of the 2nd-step welding chamber, and modification of the bearing height. The rationality of the optimized die structure was verified through porthole extrusion experiments, and the microstructure and mechanical properties of the profile at different locations were investigated. The results show that the optimized die effectively controlled the metal flow velocity. The actual profiles obtained from the experiments exhibited improved surface quality and avoided defects such as distortion and dimensional errors. The grain size is uniform at different positions of the profile, and the mechanical properties are comparable. The profile meets the performance requirements. This research provides guidance for the practical production of the profiles.

engineering, mechanical,materials science, multidisciplinary, civil
Solid Modeling Technology and Its Application in the Design of the Extrusion Die for Al Profiles

Nanning Zheng

2002-01-01

Abstract:Two methods for building solid models with ANSYS software were introduced. The methods were successfully applied to the building of the solid model of the hot extrusion combined die with portholes for aluminum profiles, which provided a basis for further finite_element analysis and optimized design.
Extrusion of 7075 Aluminium Alloy Through Double-Pocket Dies to Manufacture a Complex Profile

Gang Fang,Jie Zhou,Jurek Duszczyk

DOI: https://doi.org/10.1016/j.jmatprotec.2008.07.009

IF: 6.3

2008-01-01

Journal of Materials Processing Technology

Abstract:Low-temperature incipient melting and high deformation resistance of aluminium alloy AA7075 place extraordinary demands on extrusion die design and process optimization, especially when the shape of the extrudate is complex. The present case study was aimed at combining the considerations on die design and process optimization for the alloy to manufacture a complex solid profile with large differences in wall thickness, by means of 3D FEM simulation and experimentation instead of the traditional trial and error approach. The effects of die bearing length and extrusion speed on extrudate temperature and extrusion pressure were predicted. The results of the simulations clearly indicate that for AA7075 extrusion speed has a strong effect on extrudate temperature and the latter largely determines the surface quality of the extruded profile. A longer die bearing allows more heat to dissipate from the extrudate to the colder die and leads to a greater extrudate dimensional accuracy. The effects of die bearing length and extrusion speed on extrusion pressure are however insignificant. Thus, the extrusion throughput is mainly limited by the extrudate temperature rather than extrusion pressure. The case study demonstrates that 3D FEM simulation is a viable predictive tool for both die design and process optimization and the approach is applicable to the extrusion of other alloys for any other extrudate shapes.
Extrusion forming technology applied in die design of plug extremity

Zhuangde Jiang,Xilan Feng,Jinfa Shi,Xuewen Zong

2004-01-01

Abstract:A cold extrusion forming technology of plug is analysed in detail. Its technological data and the design of tooling structure of plug are discussed in this paper, and the design that the system architecture and die structure and key technology of the cold shaped automatic extrusion machine of plug extremity was accomplished. The DC-typed extremity shaped machine that developing with a cold extrusion forming technology can not only finish the processing of delivering material, extruding forming and cutting-off material automatically, And the production efficiency and material use ratio increases greatly, the manufacturing cost decreases obviously, and the parts quality of cold extruded plug is ensured, but also it can enhance the rigidity and intension at two ends of plug. © Professional Engineering Publishing 2004.
Effect of Pocket Design on Metal Flow Through Single-Bearing Extrusion Dies to Produce A Thin-Walled Aluminium Profile

Gang Fang,Jie Zhou,Jurek Duszczyk

DOI: https://doi.org/10.1016/j.jmatprotec.2007.08.033

IF: 6.3

2008-01-01

Journal of Materials Processing Technology

Abstract:Pocket dies, commonly used in the manufacturing of solid aluminium profiles, allow the extrusion operation to run in a semi-continuous manner. The pocket in front of the die bearing can be utilised to regulate metal flow and achieve homogeneity in flow velocity on the cross-section of the extrudate. Across the extrusion and tooling industries, the design of pocket dies relies on the intuition and experience of the designer. The design of the pocket becomes more challenging when the die is used for the manufacturing of a wide thin-walled profile. The present research concerns an investigation of the effects of pocket geometric parameters on metal flow by means of finite element (FE) simulation in combination with experimental verification. A series of single-bearing dies with pockets of different sizes, volumes and shapes were designed. A flat die without pocket was used as reference. Three-dimensional FE simulation of extrusion to produce a thin-walled aluminium profile with a large aspect ratio and thus an inherent tendency of inhomogeneity in flow velocity across its width was performed. The velocity distributions of the extrudate through these dies were revealed and the geometric parameters of the pocket affecting the metal flow collated. In addition, the effects of pocket geometric parameters on extrudate temperature and extrusion pressure were determined both numerically and experimentally. The results obtained provide the fundamentals and also practical guidelines for the design and correction of pocket dies to produce aluminium profiles.
Optimization of Die Design for Thin-Walled Flat Multi-Port Tube with the Aid of Finite Element Simulation

Wenli Fang,Ding Tang,Huamiao Wang,Dayong Li,Yinghong Peng

DOI: https://doi.org/10.1016/j.jmatprotec.2019.116418

IF: 6.3

2020-01-01

Journal of Materials Processing Technology

Abstract:Die design plays a critical role in aluminum alloy profile production, which directly influences the quality of the final products and the service life of the die. In the present study, a porthole die for a multi-hole extrusion process of a thin-walled flat multi-port tube is designed and optimized through numerical simulations. The simulation results show that with the original die, the extruded tube has a non-uniform velocity distribution in its cross-section and bends outward when exiting the die orifice. Meanwhile, a severe stress concentration in the mandrel teeth causes the premature failure of the die, and an uneven deflection of the mandrel teeth and bearing causes the arc-shaped wall thickness of the tube to exceed the tolerance level, which is validated by corresponding extrusion experiments. To solve these problems, two periods of die structure modifications are proposed, and their extrusion processes are simulated. The optimized die is confirmed to exhibit better performance than the original one in terms of lowered maximum die stress, increased bearing pressure, and decreased distortion of the final products. The results of the extrusion experiments indicate that, with the optimized die, a highly qualified tube with good appearance, desired dimensional accuracy, fine-grained microstructure, and high-pressure bearing capacity is manufactured successfully, and the die failure is delayed effectively.
Quick Profile Die Balancing of Automotive Rubber Seal Extrusion by CAE Technology

Yuankan Dai,Hong Zheng,Chixing Zhou,Wei Yu

DOI: https://doi.org/10.1080/10601320802454581

2008-01-01

Abstract:The extrusion process of a type of automotive rubber seal was considered by using Computer Aided Engineering (CAE) technology. Based on the die balancing requirement, CAE technology was utilized to speed up the die development and balancing process. The rubber material was EPDM and unacceptable extrusion deformation was found by using a parallel die. More balancing dies were then designed following the procedures proposed by the die balancing method and the effect of them was evaluated with respect to CAE analytical results. It was found that the addition of an opening section in the die would provide a more uniform velocity distribution at the die exit than the parallel die. The length of opening section was also found to affect the die balancing and so an optimum length of the opening section was determined by CAE analysis. Further optimization of the die was carried out by adjusting the local length of the opening section. Finally, a real die was cut based on the optimization results and used for production. Ideal profile products were obtained and very small and acceptable deviation from the die was observed, which validated the advantage and accuracy of CAE technology combined with die balancing requirement.
Optimized Design Method for Profile Extrusion Die Based on NURBS Modeling

Guangdong Zhang,Xiang Huang,Shuanggao Li,Tong Deng

DOI: https://doi.org/10.1007/s12221-019-1168-y

IF: 2.5

2019-08-01

Fibers and Polymers

Abstract:For optimization design of polymer extrusion dies, dimensional accuracy is critical to product quality of the extrudate. The extrusion dies used to be a regular geometrical profile, which is mostly composed by a straight line. Traditional optimization methods for extrusion die design used to have poor controllability when dealing with a curved profile. In this paper, the response surface optimization method is used to find out an optimal solution of the design of the extrusion die. Firstly, the Latin Hypercube Sampling method is used to generate the experiment samples for the design of experiments. Secondly, ANSYS Polyflow software is adopted to execute the computational fluid dynamics analysis. Thirdly, the Kriging method is used to generate the response surface. Finally, nonlinear programming by using Quadratic-Lagrangian algorithm is applied to find out the optimal solution. It is worth noting that Non-uniform Rational B-Splines (NURBS) modeling is used to optimize flow channel of an extrusion die in order to obtain a qualified extrudate. Thus, design variables for the optimization involve control points of the NURBS curve of the inlet cross-section. Meanwhile, two new objective functions, including minimization of point displacement and minimization of dimensional tolerance are proposed in the optimization process. Compared with existing objective functions of flow balancing and homogeneous die swell, the new objective functions of minimization of point displacement and minimization of dimensional tolerance have significant advantages of strong adaptability, more precise shape of the extrudate and fast convergence, which significantly improve efficiency of the optimization design and thus lower manufacturing costs of the extrusion die.

materials science, textiles,polymer science
FEM-Assisted Design of a Multi-Hole Pocket Die to Extrude U-Shaped Aluminum Profiles with Different Wall Thicknesses

G. Fang,J. Zhou,J. Duszczyk

DOI: https://doi.org/10.4028/www.scientific.net/kem.424.213

2009-01-01

Key Engineering Materials

Abstract:Wide, thin-wall profiles exiting simultaneously from a multi-hole die during aluminum extrusion tend to have different velocities and deflect from the straight line. The pockets in front of the die orifices are often used to balance the metal flow and equalize the velocities. In practice, the effect of a pocket die design on metal flow becomes known, only after the die is manufactured and a trial extrusion run is completed. The present research was intended to demonstrate the feasibility of using FEM simulation to predict metal flow, thereby reducing or hopefully eliminating trial extrusion runs. The extrusion of U-shaped profiles with different wall thicknesses through a multi-hole pocket was taken as an example to show the scope of adjusting the die pocket to regulate metal flow. The effect of pocket shape on metal flow was evaluated. It is clear that 3D FEM simulation can indeed be effectively used to optimize die design, before the die design is finalized.

Application of KBE Technology in Design of Extrusion Die for Aluminum Profile

UG-based KBE System for the Design of Extrusion Porthole Dies for Aluminium Profile

Study on Simulation of Stamping Forming and Die Surface Optimization of Aluminum Alloy Plate

Research on KBE Technology in Stamping Die Design

KBE-Based Mold Cavity Design System

Study on Extrusion Process and Die Design System Based on KBE

Key Technologies of "zero Die Trial" Design System for Aluminum Profile Extrusion

CAD system of the extrusion dies to produce aluminum profile based on UG system

Design and analysis sofeware system of the aluminum profile extrusion die

Application of Artificial Intelligence Extrusion Die Model Based on Finite Element Simulation in Decorative Material Aluminum Alloy

The Knowledge-Based Integrating System for Aluminum Extrusion Die Design

Analysis of Forming of Automotive Drawbar and Design of the Die

Optimization of porthole extrusion die for 6063 aluminum alloy profile with thin-walled multi-cavity complex section and analysis of profile performance

Solid Modeling Technology and Its Application in the Design of the Extrusion Die for Al Profiles

Extrusion of 7075 Aluminium Alloy Through Double-Pocket Dies to Manufacture a Complex Profile

Extrusion forming technology applied in die design of plug extremity

Effect of Pocket Design on Metal Flow Through Single-Bearing Extrusion Dies to Produce A Thin-Walled Aluminium Profile

Optimization of Die Design for Thin-Walled Flat Multi-Port Tube with the Aid of Finite Element Simulation

Quick Profile Die Balancing of Automotive Rubber Seal Extrusion by CAE Technology

Optimized Design Method for Profile Extrusion Die Based on NURBS Modeling

FEM-Assisted Design of a Multi-Hole Pocket Die to Extrude U-Shaped Aluminum Profiles with Different Wall Thicknesses