Abstract:Hexanitrohexaazaisowurtzitane (CL-20) is a high-energy material with high shock sensitivity. The evolution of shock into the detonation of CL-20 deserves academic attention and research. An embedded electromagnetic particle velocity gauge was used to study the shock initiation of detonation in a pressed solid explosive formulation, C-1, containing 94wt-% epsilon phase CL-20 and 6wt-% fluororubber (FPM). In conventional experiments, the magnetic field was generated using a pair of electromagnets with a complex structure and operation. A new device was designed to solve complex problems. This device comprised NdFeB magnets, pole shoes and magnetic yokes; using this technique, a uniform magnetic field could be created. A series of shock initiation experiments on high-explosive C-1 was performed, and the explosive samples were initiated at different intensity input shocks by an explosive driven flyer plate. In situ magnetic particle velocity gauges were utilized to detail the growth from an input shock to detonation, and the attenuation of particle velocity in unreacted C-1 was also obtained in low-intensity shock initiation experiments. Hugoniot data for C-1 in the form of shock velocity D vs. particle velocity Up were obtained. A simulation model for shock initiation of C-1 was established, and the particle velocity data from several experiments were used to determine the parameters required for the unreacted equation of state and ignition and growth reactive flow model for C-1. These coefficients were then applied in the calculation of the initial shock pressure-distance to detonation relationship (Pop-plot) for the explosive. Based on the results of experiments and simulations, the shock sensitivity characteristic of C-1 was described.

Investigation of Solid Explosives Initiation under Shock Waves

Experimental and Numerical Study on the Shock Initiation of PBXC03 Explosive under the Different Loading Pressure

Delayed Detonation of Solid Explosives under Low Amplitude Shock Wave Loading

Low-amplitude Shock-Induced Delayed Detonation of Solid Propellant

Shock Initiation of Explosives Investigated with Small Partition Experiment and Numerical Simulation

Shock Initiation of the CL‐20‐Based Explosive C‐1 Measured with Embedded Electromagnetic Particle Velocity Gauges

Research on Shock Initiation of the High Energy Solid Propellants

Lateral rarefaction wave effects on shock initiation of heterogeneous condensed explosives

Embedded Manganin Gauge Measurements and Modeling of Shock Initiation in HMX‐Based PBX Explosives with Different Particle Sizes and Porosities

Experimental research on effects of porosity on shock initiation of PBX explosive

Shock initiation of CL-20 based explosives

Shock to Initiation Characters of Heated Explosives with Different Confinement

Experimental and Numerical Calculation Study on Shock Sensitivity of Aluminum Explosive

Mesoscopic Effects on Shock Initiation of Multi-Component Plastic Bonded Explosives

Experimental and theoretical investigation into the response to shock wave for booster explosives JO9C, JH14, JH6, and insensitive RDX

Test to Determine the Response Level of Heterogeneous Explosive by Fragment Shock Initiation

Research on the Safety Response Characteristics of Composite Charges Under Shock Wave Loading

Initiation and Detonation Growth Characteristics of Polymer Bonded Explosives under Ramp-Wave Loadings

A Systematic Method to Determine and Test the Ignition and Growth Reactive Flow Model Parameters of a Newly Designed Polymer‐Bonded Explosive

Experimental Study on the Impact Damage and Shock Initiation of Damaged Explosives

Dynamic Mechanical Damage and Non-Shock Initiation of a New Polymer Bonded Explosive During Penetration