Abstract:Metal organic frameworks (MOFs) have unique advantages in optimizing the ionic conductivity of battery separators because of their rich cavity structure and highly ordered and connected pores. In this study, we used a hydrothermal method to synthesize a functional material, Ag-MOF crystal, as a separator coating content, and then studied the properties and application effect of the MOF-Al2O3-blended coating applying to a polyethylene (PE) separator (MOFxAl1–x/PE). Results show that MOF0.08Al0.92/PE (MOF/Al2O3 = 0.08:0.92) used in NCM811||Li cells significantly not only improves the fast charge–discharge performance of the cells but also inhibits the growth of lithium dendrites during long-term charge–discharge cycling; the Li+ transference number (tLi+) of the MOF0.08Al0.92/PE composite separator is 0.61; the Li||separator||Li half-cell circulates stably for 1000 h at varying current density from 0.5 to 10 mA cm–2 and only produces low overpotentials, indicating that MOF0.08Al0.92 stabilizes lithium. The initial capacity of the NCM811||Li cell using the MOF0.08Al0.92/PE separator is 165.0 mA h g–1, its capacity retention is 70.67% after 300 cycles at 5 C, and the interface resistance of the cells only increases from 13.8 to 31.5 Ω, whereas the capacity retention of Al2O3/PE separator batteries is only 40.41% (62.2 mA h g–1) under the same conditions. During the charge–discharge cycling, the MOF-Al2O3 coating induces the lithium anode to quickly form a stable and dense solid–electrolyte interphase layer, promotes the uniform deposition of Li+, and inhibits the growth of lithium dendrites as well.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c00390.Crystal data and structure refinement for Ag-MOF; XRD patterns of the Ag-MOF; SEM image of the MOF0.08Al0.92 coating layer; elemental mapping of Al, O, Ag, C, and N; TGA curves; DCS curves; stress–strain curves; Nyquist plots; LSV curves of PE, Al2O3/PE, MOF0.05Al0.95/PE, and MOF0.08Al0.92/PE separators; EDS mapping; charge and discharge profiles of MOF0.08Al0.92/PE separator cells at 0.2 C; electrochemical performance of Li||PE||Li and Li||MOF0.08Al0.92/PE||Li symmetrical cells; long-term cycle stability at 1.0 mA cm–2; and XPS of Li anodes recovered from galvanostatic Li plating/stripping of the Li|| Al2O3/PE||Li cell after 100 cycles at 1 mA cm–2 (PDF)This article has not yet been cited by other publications.

Characteristics of Electron Emission Resistant Mo-Grid

Grid Emission Suppression Characteristics of Molybdenum Grids Coated with Hf and Pt Films

Anti-emission Characteristics of the Grid Coated with Hafnium Film

Corrosion behavior and failure mechanism of amorphous Al2O3 coating at high-temperature LBE

Study on anti-emission materials for non-emitting grid applications in microwave power tubes

The Mechanism of Pt Films to Suppress the Electron Emission of Grid in TWTs

Semi-transparent Biomass-Derived Macroscopic Carbon Grids for Efficient and Tunable Electromagnetic Shielding

Characterisation and Oxidation Behaviour of Plasma Surface Alloyed on Γ-Tial Alloy

Consideration of Alumina Coating Fabricated by Sol-gel Method as MHD Coating against PbLi

Transient oxidation behavior of MCrAlY coating irradiated by high-current pulsed electron beam

Hydrogen permeation behavior and mechanism of Cr2O3/Al2O3 bipolar oxide film under plasma discharging environment

Microstructural evolution of thermally grown oxide of an arc ion plated M CrAl X coatings after high-current pulsed electron beam treatment

Xe20+ ions irradiation and autoclave corrosion coupled with steam oxidation behaviors of FeCrAlMoSiY-coated Zr claddings

Oxidation behavior of CrAl-Mo coated Zircaloy-4 in DB and BDB scenarios

Effects of the Separator MOF-Al 2 O 3 Coating on Battery Rate Performance and Solid–Electrolyte Interphase Formation

Microstructural modifications and high-temperature oxidation resistance of arc ion plated NiCoCrAlYSiHf coating via high-current pulsed electron beam

Comparative Study on the Initial Oxidation Behavior of Conventional and Nanocrystalline MCrAlY Coatings - Effect of Microstructure Evolution and Dynamic Mechanisms

High Corrosion Resistance and Conductivity of Al2O3/CrN Coating for Metal Bipolar Plates in PEMFCs: Al2O3 Hinders CrN Columnar Crystals Growth

Thermal Cycling Behavior of Thermal Barrier Coatings with MCrAlY Bond Coat Irradiated by High-Current Pulsed Electron Beam

Effect of LBE corrosion on microstructure of amorphous Al2O3 coating by magnetron sputtering

Structural and Electrochemical Study of Al2O3 and TiO2 Coated Li1.2Ni0.13Mn0.54Co0.13O2 Cathode Material Using ALD