Abstract:Light cycle oil (LCO) is a significant products of fluid catalytic cracking (FCC) process in refineries. Increasing the output of high-value chemicals from LCO is an important step towards achieving 'dual carbon' targets. Separating aromatic and non-aromatic components in LCO is crucial to producing valuable products. Extraction is a promising process for separating these components based on the principle of "polar similarity and solubility". From the perspective of industrial applications, this study explores the development and application of novel functionalized extractants to produce valuable products. Ionic liquids (ILs) with alkyl-substituted imidazoles [C n MIM] + and alkyl-substituted pyridines [C n MPy] + as cations and tetrafluoroborate [BF 4 ] − and hexafluorophosphate [PF 6 ] − as anions were used. The effects of extraction temperature, IL-oil ratio, number of extraction stages, and reusability were systematically investigated. In addition, the basic physical properties data of ILs and residues in oil were studied in detail. The suitability of ionic liquids for industrial applications was evaluated based on their solubility with hydrocarbons, physical and chemical properties, selectivity for aromatics, and residues in oil. Following a thorough examination of the performance of ionic liquids for the extraction of aromatics from LCO, [C 6 MIM][PF 6 ] was identified as the most suitable extractant. A multi-stage countercurrent extraction process was established and the conditions systematically studied. The results demonstrate that the aromatic content of the extracted oil is greater than 95 wt%, which can be utilized for producing BTX products. Meanwhile, the aromatic content of the raffinate oil is less than 10 wt%, which can function as a clean diesel blending component or as steam cracking feedstocks. This study has successfully promoted the industrial application of functionalized ionic liquids for the LCO dearomatization process and provided an essential reference for developing new functionalized extraction solvents.

Experimental Study and Technology Research on the Extraction of Heavy Aromatics from Methanol Synthetic Oil

Extractive Distillation of Hydrocarbons with Dimethylformamide: Experimental and Simulation Data

Influence of Operating Conditions on the Hybrid Separation Process Used for C4 Etherified Products

Study of Methanol Extraction from Saturated Alkanes: Solvent Screening, Liquid–Liquid Equilibrium Measurement, and Thermodynamic Simulation

Combination of Column Adsorption and Supercritical Fluid Extraction for Recovery of Dissolved Essential Oil from Distillation Waste Water of Yulania Liliiflora

Enhancing light olefins and aromatics production from naphthenic-based vacuum gas oil: Process integration, techno-economic analysis and life cycle environmental assessment

Organosiloxane membranes for heavy aromatic oil fractionation

Study on Removal of Nitrogen-Containing Heterocyclic Compounds Contained in Crude Methylnaphthalene Oil by Formamide Extraction

Denitrogenation of Light Hydrocarbon Fractions with Natural Deep Eutectic Solvents Using Commercial Extraction Equipment

The Extraction of Aromatics Using Nmp: Liquid-Liquid Equilibrium Determination and Mechanistic Exploration

Study of aromatic extraction from light cycle oil from the viewpoint of industrial applications

Effective extraction of aromatic monomers from lignin oil using a binary petroleum ether/dichloromethane solvent

Simulation of Acetophenone and Α-Phenylethanol Separation by Extractive Distillation

Energy-saving extractive distillation system using o-xylene as an entrainer for the high-purity separation of dimethyl carbonate/methanol azeotrope

Extraction and sequential elution of a heavy oil from direct coal liquefaction

Study of extraction of organic acid from petroleum by NMP in lube oil refining

Process Simulation for Separation of Dimethyl Carbonate and Methanol Through Atmospheric-Pressurized Rectification

The extraction of aromatics using n-methylpyrrolidone: Liquid-liquid equilibrium determination and mechanism exploration

Solute structure effect on polycyclic aromatics separation from fuel oil: Molecular mechanism and experimental insights

Investigation of the mechanism of solvothermal extraction of direct coal liquefaction residue by macromolecular models

Selective Extraction of Aromatics from Residual Oil with Subcritical Water