Abstract:The IC lead frame is an essential component in semiconductor packaging, primarily composed of a nickel (Ni)–copper (Cu) alloy in which Ni is electroplated onto a Cu substrate. In this study, synergistic solvent extraction using a binary extractant containing LIX984N and Cyanex302, followed by two-stage selective stripping using sulfuric acid (H2SO4) and nitric acid (HNO3) as the stripping agent, was employed to separate and recover Cu and Ni from the leachate of an IC lead frame. The results indicated that under the optimal conditions of synergistic solvent extraction with an extraction pH value of 1, an extractant concentration of 0.015 M LIX984N + 0.0375 M Cyanex302, an extraction aqueous/organic (A/O) ratio of 1:1, and an extraction time of 5 min, the extraction efficiencies for Cu and Ni were 99.8% and 1.17%, respectively. The distribution ratios were DCu 999 and DNi 0.012, resulting in a separation factor of 83,250. In addition, the separation factor was much higher than that of using individual extractant of LIX984N (6208.3) or Cyanex302 (22,185.2). Subsequently, under optimal first-stage stripping conditions, using 0.05 M H2SO4 at a stripping organic/aqueous (O/A) ratio of 1:1, and with a stripping time of 3 min, a stripping efficiency of 99.9% for Ni was achieved. Next, under optimal second-stage stripping conditions, using 5 M HNO3 at a stripping O/A ratio of 2:1, and with a striping time of 3 min, a stripping efficiency of 99.9% for Cu was achieved. Finally, sodium hydroxide (NaOH) was added to the respective stripping solutions to precipitate Ni and Cu ions, followed by calcination treatment for the precipitates to obtain NiO and CuO, respectively. The purity of the former was 99.74% and that of the latter was 99.82%. The results demonstrate that synergistic solvent extraction using a binary extractant containing LIX984N and Cyanex302 can almost entirely extract Cu in the leachate of an IC lead frame at a lower extraction pH and a lower extractant concentration, thus reducing the co-extraction of Ni. In addition, less co-extracted Ni in the organic phase can be selectively stripped using dilute H2SO4, thus reducing the co-stripping of Cu. Hence, the effective separation and recovery of Cu and Ni in IC lead frame leachate can be achieved, which contributes to improving the sustainability of natural resources.

Extraction Floatation Method for Separation of Copper(II) with Ascorbic Acid Ammonium Thiocyanate Ethanol System in Presence of Ammonium Sulphate

EXTRACTION OF COPPER(Ⅱ)ION BY CHEMICAL COMPLEXATION WITH LIX984

Removal of copper (II) from aqueous solutions by flotation using polyaluminum chloride silicate (PAX-XL60 S) as coagulant and carbonate ion as activator

Exclusive Separation of Cu(II) with Aminophosphonic Acid-Functionalized Hydrogel from Strong Acidic Media

High Efficient Removal of Cu(II) by a Chelating Resin from Strong Acidic Solutions: Complex Formation and DFT Certification

Optimization Study of Operation Parameters for Extracting \hbox {Cu}^{2+} from Sulfuric Solution Containing \hbox {Co}^{2+} with LIX984N in a Laminar Microchip

Separation and recovery of copper in Cu−As-bearing copper electrorefining black slime by oxidation acid leaching and sulfide precipitation

Separation of Co(II), Cu(II), Ni(II) and Mn(II) from synthetic hydrochloric acid leaching solution of spent lithium ion batteries by solvent extraction

Arsenic removal from acid extraction solutions of copper smelting flue dust

Optimization Study of Operation Parameters for Extracting Cu^2+ from Sulfuric Solution Containing Co^2+ with LIX984N in a Laminar Microchip

Experimental Study on Separation of Iron and Arsenic from Copper Sulfate Solution

Enhancement Mechanisms Behind Exclusive Removal and Selective Recovery of Copper from Salt Solutions with an Aminothiazole-Functionalized Adsorbent

Application of the Taguchi Method and Central Composite Design for the Highly Selective and Efficient Extraction of Cu(II) ions from an Aqueous Solution Containing Mn(II), Co(II), Ni(II), Zn(II), Cu(II), and Pb(II) ions Mixture Using Benzyl Bis(thiosemicarbazone)

Combined cation-exchange and extraction chromatographic method of pre-concentration and concomitant separation of Cu(II) with high molecular mass liquid cation exchanger after its online detection

Highly selective ion precipitation flotation for ternary Co–Zn–Mn separation: Stepwise chelation capture of Co and Zn from simulated zinc hydrometallurgy wastewater

Solvent Extraction with Cyanex 923 to Remove Arsenic(V) from Solutions

RECOVERY AND SEPARATION OF As AND Zn FROM THE LEACHING SOLUTION OF WHITE ASH

Efficient recovery of copper resources from copper smelting waste acid based on Cu(II)/As(III) competitive sulfuration mechanism

Solvent extraction-based recovery of Co from leach solutions of Cu Co ores using a Mextral 6103H-naphthenic acid- isooctanol system

Separation and Recovery of Copper and Nickel in the Leachate of a Waste IC Lead Frame through Synergistic Solvent Extraction Using a Binary Extractant Containing LIX984N and Cyanex302 Followed by Selective Stripping

Extraction of Cu and Ni from Low-Ni Matte by a Combined Chemical Precipitation and Molten Salt Electrolysis Approach