Abstract:Kraft lignin grafted with hydrophilic polymers has been prepared using reversible addition-fragmentation chain-transfer (RAFT) polymerization and investigated for use as a surfactant. In this preliminary study, polyacrylamide and poly(acrylic acid) were grafted from a lignin RAFT macroinitiator at average initiator site densities estimated to be 2 per particle and 17 per particle. The target degrees of polymerization were 50 and 100, but analysis of cleaved polyacrylamide was consistent with a higher average molecular weight, suggesting not all sites were able to participate in the polymerization. All materials were readily soluble in water, and dynamic light scattering data indicate polymer-grafted lignin coexisted in isolated and aggregated forms in aqueous media. The characteristic size was 15-20 nm at low concentrations, and aggregation appeared to be a stronger function of degree of polymerization than graft density. These species were surface active, reducing the surface tension to as low as 60 dyn/cm at 1 mg/mL, and a greater decrease was observed than for polymer-grafted silica nanoparticles, suggesting that the lignin core was also surface active. While these lignin surfactants were soluble in water, they were not soluble in hexanes. Thus, it was unexpected that water-in-oil emulsions formed in all surfactant compositions and solvent ratios tested, with average droplet sizes of 10-20 μm. However, although polymer-grafted lignin has structural features similar to nanoparticles used in Pickering emulsions, its interfacial behavior was qualitatively different. While at air-water interfaces, the hydrophilic grafts promote effective reductions in surface tension, we hypothesize that the low grafting density in these lignin surfactants favors partitioning into the hexanes side of the oil-water interface because collapsed conformations of the polymer grafts improve interfacial coverage and reduce water-hexanes interactions. We propose that polymer-grafted lignin surfactants can be considered as random patchy nanoparticles with mixed hydrophilic and hydrophobic domains that result in unexpected interfacial behaviors. Further studies are necessary to clarify the molecular basis of these phenomena, but grafting of hydrophilic polymers from kraft lignin via radical polymerization could expand the use of this important biopolymer in a broad range of surfactant applications.

Graft Copolymerization of Sodium Lignosulfonate with Acrylic Acid

Graft Copolymerization of Styrene and Acrylonitrile in the Presence of Poly(propylene Glycol): Modeling and Simulation of Semi‐Batch and Continuous Processes

Effect of graft copolymerization of fir sawdust lignocellulose with N-vinylpyrrolidone on adsorption capacity to tea catechins

Graft Polymerization of Acrylic Monomers Onto Lignin with CaCl2–H2O2 As Initiator: Preparation, Mechanism, Characterization, and Application in Poly(lactic Acid)

Study on Regularities of Graft Copolymerization of Acrylic Acid Onto Fungal Cell Wall

Suspension Swelling Graft Copolymerization of Acrylonitrile-Chlorinated Polyethylene-Styrene:Function of Composite Suspending Agents

Synthesis of the starch grafting of superabsorbent and high oil-absorbing resin

Synthesis and Performance of A Self Crosslinkable Acrylate Copolymer with High Compatibility for an Oil Well Cement Modifier

Synthesization and Characterization of Lignin-graft-Poly (Lauryl Methacrylate) via ARGET ATRP

Polymer-grafted lignin surfactants prepared via reversible addition-fragmentation chain-transfer polymerization

Graft Emulsion Copolymerization of Acrylates and Siloxane

Preparation and Chracaterization of Novel Graft Copolymers of LLDPE

Compatibilization of Acrylic Polymer-Silk Fibroin Blend Fibers. I. Graft Copolymerzation of Acrylonitrile Onto Silk Fibroin

Graft Copolymerization of Styrene and Acrylonitrile in the Presence of Poly(propylene glycol): Kinetics and Modeling

Amphiphilic Lignin Nanoparticles Made from Lignin-Acrylic Acid-Methyl Methacrylate Copolymers

Surface functionalization of Si3N4 nanoparticles by graft polymerization of glycidyl methacrylate and styrene

PREPARATION OF A SUPERABSORBENT POLYMER BY GRAFT COPOLYMERIZATION OF CORN STARCH AND ACRYLIC ACID

Synthesis of starch‐based flocculant by multi‐component grafting copolymerization and its application in oily wastewater treatment

Study on preparation of cationic flocculants by grafting binary monomer on cellulose substrate by γ-ray co-irradiation

Comparison of modification methods for the preparation of coarse organic flocculant with macromolecular products from the hydrothermal liquid phase of sludge

Fabrication and evaluation of novel amphiphilic star block copolymers for increasing free water content in lignite to make coal water slurries