Abstract:Introducing vinyl groups onto the backbone of technical lignin provides an opportunity to create highly reactive renewable polymers suitable for radical polymerization. In this work, the chemical modification of softwood kraft lignin was pursued with etherification, followed by direct esterification with acrylic acid (AA). In the first step, phenolic hydroxyl and carboxylic acid groups were derivatized into aliphatic hydroxyl groups using ethylene carbonate and an alkaline catalyst. The lignin was subsequently fractionated using a downward precipitation method to recover lignin of defined molar mass and solubility. After recovery, the resulting material was then esterified with AA, resulting in lignin with vinyl functional groups. The first step resulted in approximately 90% of phenolic hydroxyl groups being converted into aliphatic hydroxyls, while the downward fractionation resulted in three samples of lignin with defined molar masses. For the esterification reaction, the weight ratio of reagents, reaction temperature, and reaction time were evaluated as factors that would influence the modification efficacy. 13C NMR spectroscopy analysis of lignin samples before and after esterification showed that the optimized reaction conditions could reach approximately 40% substitution of aliphatic hydroxyl groups. Both steps only used lignin and the modifying reagent (no solvent), with the possibility of recovery and reuse of the reagent by dilution and distillation. An additional second esterification step of the resulting lignin sample with acetic acid or propionic acid converted 90% of remaining hydroxyl groups into short-chain carbon aliphatic esters, making a hydrophobic material suitable for further copolymerization with synthetic hydrophobic monomers.

Graft Polymerization of Acrylic Monomers Onto Lignin with CaCl2–H2O2 As Initiator: Preparation, Mechanism, Characterization, and Application in Poly(lactic Acid)

Synthesization and Characterization of Lignin-graft-Poly (Lauryl Methacrylate) via ARGET ATRP

Enzymatic synthesis of kraft lignin-acrylate copolymers using an alkaline tolerant laccase

Enzymatic Graft Polymerization from Cellulose Acetoacetate: a Versatile Strategy for Cellulose Functionalization

Photo-grafting Poly(acrylic Acid) Onto Poly(lactic Acid) Chains in Solution

Grafting Lignin with Bioderived Polyacrylates for Low-Cost, Ductile, and Fully Biobased Poly(lactic Acid) Composites

Amphiphilic Lignin Nanoparticles Made from Lignin-Acrylic Acid-Methyl Methacrylate Copolymers

Improving Grafting Efficiency of Dicarboxylic Anhydride Monomer on Polylactic Acid by Manipulating Monomer Structure and Using Comonomer and Reducing Agent

On Laccase-Catalyzed Polymerization of Biorefinery Lignin Fractions and Alignment of Lignin Nanoparticles on the Nanocellulose Surface via One-Pot Water-Phase Synthesis

GRAFT POLYMERIZATION OF AN OXAZOLIDINONYL-CONTAINING ACRYLIC MONOMER ON CELLULOSE FIBERS

Functionalization and Thereafter Grafting with Lactic Acid to Synthesize Lignin-polylactic Acid Copolymer for Thin Film Preparation

Functional Lignin Building Blocks: Reactive Vinyl Esters with Acrylic Acid.

The Study of Melt Grafting Mechanism of Acrylic Acid and Butyl Acrylate Onto Low Density Polyethylene and Its Application As Internal Plasticizer

Preparation and Photoresponsive Properties of Lignin-graft Azobenzene-Containing Liquid Crystalline Copolymers

A Facile Method for Grafting Polymerisation of Acrylonitrile onto LDPE Film with High Grafting Efficiency

Synthesis of Lignin-Based MMA-co-BA Hybrid Resins from Cornstalk Residue via RAFT Miniemulsion Polymerization and Their Characteristics

Synthesis and catalytic performance of wood cellulose nanofibers grafted with polylactic acid in rare-earth complexes based on tetrazole carboxylic acids

Improved Performance of Polylactic Acid Biocomposites at High Lignin Loadings through Glycidyl Methacrylate Grafting of Melt-Flowable Organosolv Lignin

An electrochemically mediated ATRP synthesis of lignin-g-PDMAPS UCST-thermoresponsive polymer

Graft Copolymerization of Sodium Lignosulfonate with Acrylic Acid

Synthesis of Multifunctional Polypropylene Via Solid Co-Grafting and the Mechanism Study.