Abstract:Copper is widely used in many applications such as heat exchangers, condensers, heating and air conditioning systems, electricity, electronic circuitry and ornamental parts. This paper reviews the issue of copper corrosion in different environments and applications. Special attention is paid to the influence of relative humidity and low molecular weight carboxylic acids. These acids are present in rain, snow, clouds and particulate matter and contribute about 15-35% of rain acidity. Attention is also paid to copper corrosion originated by formic, acetic, propionic and butyric acid vapours. Corrosion product layers (patina) are analysed, showing the relationship between potential and current density cathodic peaks, and models are proposed that show a proportionality factor of the dimensions of a resistor. These results are of practical importance in copper roofing applications. Before 1985, copper was almost universally considered to be a corrosion resistant conduit of potable water, and few instances of copper tube failure were reported. Where unacceptable performance was identified, the problem was usually attributed to reticulation and plumbing systems. In air conditioning applications, premature failure of copper tubing frequently occurs due to pitting corrosion after a short time in service or even during post-installation leakage tests. This type of corrosion is described in the literature as formicary corrosion, and its morphology is characterised by microscopic caverns connected by tunnels. Specimens are analysed to assess the reasons for such premature corrosion failure. Finally, procedures to mitigate copper corrosion are addressed. Pickling in dilute mineral acids (H2SO4 and HCl) is discussed as the most common method for removing oxides formed on the surface of copper based materials during mill processing and manufacturing operations. The use of corrosion inhibitors, such as immersion corrosion inhibitors and volatile corrosion inhibitors (VCI), is a widespread practice to reduce copper corrosion, achieving significant delays in the corrosion process. Reference is made to the search for new environmentally friendly inhibitors for copper and bronze using organic compounds in acid, neutral and alkaline media, and a number of ecological alternatives are reviewed.

Prevention of Tubular Copper Conductor in Water-Cooling Generator

Characterization of Scale Substances Depositing on Hollow Copper Conducting Wires of Internal Cooling Water Generator

Study on the Superhydrophilic Modification and Enhanced Corrosion Resistance Method of Aluminum Alloy Distillation Desalination Tubes

Study on Performance of New Corrosion and Scale Inhibitor Composed of CA/HEDP/IA-SSA Copolymer

CORROSION AND PROTECTION OF CONDENSERS IN XUZHOU POWER PLANT

Research summaries on the chloride ions corrosion of copper-alloyed condenser in heat power plants

Effects of iron in circulating waters on corrosion and scale and inhibition of corrosion and scale

A Sulphuric Solution Inhibitor Containing Dithiocarbamate and Its Anti-corrosion Effect on Copper

Effectiveness of an amine-based inhibitor—guanidine for steel in chloride-contaminated concrete

A corrosion study of metals in the reclaimed water

Progress of Corrosion Inhibition Research on Copper in Acidic Solution

Failure analysis and prevention of corrosion occurring during storage on steam generator tube sheet for advanced PWR, Part II: Corrosion prevention design

Effects Of Low Electric Current In Deionized Water Dielectric On Corrosion Of Aluminum Heat Sinks In Hv Converter Valves

Corrosion and Protection of 0cr18ni9 Stainless Steel Cooling Water Pipe in Power Plant

Tungstate Species Corrosion Inhibitor for Protection of Carbon Steel in Seawater

Optimization and understanding of corrosion inhibitors for cooling water system

DEVELOPMENT AND APPLICATION OF TRACE-ALKALINE CIRCULATION TREATMENT TECHNOLOGY FOR INNERCOOLING WATER IN LARGE GENERATORS

Copper deterioration: causes, diagnosis and risk minimisation

A survey of cooling tower water quality for condenser tube fouling potential

Electrochemical and Thermodynamic Investigation of Diniconazole and Triadimefon As Corrosion Inhibitors for Copper in Synthetic Seawater

Mixture Design of an Environmentally Friendly Scale and Corrosion Inhibitor in Reclaimed Wastewater for Cooling Systems