Abstract:Breathing motion is one of the major limiting factors for reducing dose and irradiation of normal tissue for conventional conformal radiotherapy. This paper describes a relationship between tracking lung motion using spirometry data and image registration of consecutive CT image volumes collected from a multislice CT scanner over multiple breathing periods. Temporal CT sequences from 5 individuals were analyzed in this study. The couch was moved from 11 to 14 different positions to image the entire lung. At each couch position, 15 image volumes were collected over approximately 3 breathing periods. It is assumed that the expansion and contraction of lung tissue can be modeled as an elastic material. Furthermore, it is assumed that the deformation of the lung is small over one‐fifth of a breathing period and therefore the motion of the lung can be adequately modeled using a small deformation linear elastic model. The small deformation inverse consistent linear elastic image registration algorithm is therefore well suited for this problem and was used to register consecutive image scans. The pointwise expansion and compression of lung tissue was measured by computing the Jacobian of the transformations used to register the images. The logarithm of the Jacobian was computed so that expansion and compression of the lung were scaled equally. The log‐Jacobian was computed at each voxel in the volume to produce a map of the local expansion and compression of the lung during the breathing period. These log‐Jacobian images demonstrate that the lung does not expand uniformly during the breathing period, but rather expands and contracts locally at different rates during inhalation and exhalation. The log‐Jacobian numbers were averaged over a cross section of the lung to produce an estimate of the average expansion or compression from one time point to the next and compared to the air flow rate measured by spirometry. In four out of five individuals, the average log‐Jacobian value and the air flow rate correlated well ( on average for the entire lung). The correlation for the fifth individual was not as good ( on average for the entire lung) and can be explained by the small variation in tidal volume for this individual. The correlation of the average log‐Jacobian value and the air flow rate for images near the diaphragm correlated well in all five individuals ( on average). These preliminary results indicate a strong correlation between the expansion/compression of the lung measured by image registration and the air flow rate measured by spirometry. Predicting the location, motion, and compression/expansion of the tumor and normal tissue using image registration and spirometry could have many important benefits for radiotherapy treatment. These benefits include reducing radiation dose to normal tissue, maximizing dose to the tumor, improving patient care, reducing treatment cost, and increasing patient throughput.

Inverse Analysis of Material Parameters for Lung Tissure and Tumor

Extended Precise Integration Method For Axisymmetric Thermo-Elastic Problem In Transversely Isotropic Material

In Vivo Characterization Of Lung Tissue Properties From 4d Ct Images For Cancer Radiation Therapy

A numerical method for two-dimensional nonlinear transient inverse heat conduction problems for orthotropic material

Sensitivity of Tumor Motion Simulation Accuracy to Lung Biomechanical Modeling Approaches and Parameters

Strain-rate-dependent material properties of human lung parenchymal tissue using inverse finite element approach

Stochastic Finite Element Framework for Simultaneous Estimation of Cardiac Kinematic Functions and Material Parameters

Myocardial material parameter estimation: a non-homogeneous finite element study from simple shear tests

Simulation of Active Cardiac Dynamics with Orthotropic Hyperelastic Material Model

The Finite Element Analysis of Femur and Tibia for Homogeneous Materials and CT Gray Value Based Materials

A Method for Determining Elastic Constants and Boundary Conditions of Three-Dimensional Hyperelastic Materials

Assessing the Mechanical Properties of Anisotropic Soft Tissues Using Guided Wave Elastography: Inverse Method and Numerical Experiments

A Method to Solve the Inverse Problem in Ultrasound Elastography

Predictive Modeling Of Lung Motion Over The Entire Respiratory Cycle Using Measured Pressure-Volume Data, 4dct Images, And Finite-Element Analysis

Analysis of a tumor model as a multicomponent deformable porous medium

Tracking Lung Tissue Motion and Expansion/compression with Inverse Consistent Image Registration and Spirometry

Validation of Material Algorithms for Femur Remodelling Using Medical Image Data.

Towards Non-Invasive Lung Tumor Tracking Based on Patient Specific Model of Respiratory System

SU‐GG‐J‐08: Physics‐Based Respiration‐Simulating Model Incorporating Pressure‐Volume Parameters for Lung: What Can We Learn from the Biomechanical Modeling Community?

Computational Analysis of Tumor Treating Fields for Non-Small Cell Lung Cancer in Full Thoracic Models

Towards real-time finite-strain anisotropic thermo-visco-elastodynamic analysis of soft tissues for thermal ablative therapy