Abstract:Breathing motion is one of the major limiting factors for reducing dose and irradiation of normal tissue for conventional conformal radiotherapy. This paper describes a relationship between tracking lung motion using spirometry data and image registration of consecutive CT image volumes collected from a multislice CT scanner over multiple breathing periods. Temporal CT sequences from 5 individuals were analyzed in this study. The couch was moved from 11 to 14 different positions to image the entire lung. At each couch position, 15 image volumes were collected over approximately 3 breathing periods. It is assumed that the expansion and contraction of lung tissue can be modeled as an elastic material. Furthermore, it is assumed that the deformation of the lung is small over one‐fifth of a breathing period and therefore the motion of the lung can be adequately modeled using a small deformation linear elastic model. The small deformation inverse consistent linear elastic image registration algorithm is therefore well suited for this problem and was used to register consecutive image scans. The pointwise expansion and compression of lung tissue was measured by computing the Jacobian of the transformations used to register the images. The logarithm of the Jacobian was computed so that expansion and compression of the lung were scaled equally. The log‐Jacobian was computed at each voxel in the volume to produce a map of the local expansion and compression of the lung during the breathing period. These log‐Jacobian images demonstrate that the lung does not expand uniformly during the breathing period, but rather expands and contracts locally at different rates during inhalation and exhalation. The log‐Jacobian numbers were averaged over a cross section of the lung to produce an estimate of the average expansion or compression from one time point to the next and compared to the air flow rate measured by spirometry. In four out of five individuals, the average log‐Jacobian value and the air flow rate correlated well ( on average for the entire lung). The correlation for the fifth individual was not as good ( on average for the entire lung) and can be explained by the small variation in tidal volume for this individual. The correlation of the average log‐Jacobian value and the air flow rate for images near the diaphragm correlated well in all five individuals ( on average). These preliminary results indicate a strong correlation between the expansion/compression of the lung measured by image registration and the air flow rate measured by spirometry. Predicting the location, motion, and compression/expansion of the tumor and normal tissue using image registration and spirometry could have many important benefits for radiotherapy treatment. These benefits include reducing radiation dose to normal tissue, maximizing dose to the tumor, improving patient care, reducing treatment cost, and increasing patient throughput.

In Vivo Characterization Of Lung Tissue Properties From 4d Ct Images For Cancer Radiation Therapy

Estimation and Validation of Patient-Specific Liver Elasticity Distributions Derived from 4DMR for Radiotherapy Purposes

Image-based Meshing of Patient-Specific Data:Converting Medical Scans into Highly Accurate Computational Models

SU‐GG‐J‐08: Physics‐Based Respiration‐Simulating Model Incorporating Pressure‐Volume Parameters for Lung: What Can We Learn from the Biomechanical Modeling Community?

4D medical image computing and visualization of lung tumor mobility in spatio-temporal CT image data.

Physics-informed motion registration of lung parenchyma across static CT images

Sensitivity of Tumor Motion Simulation Accuracy to Lung Biomechanical Modeling Approaches and Parameters

Predictive Modeling Of Lung Motion Over The Entire Respiratory Cycle Using Measured Pressure-Volume Data, 4dct Images, And Finite-Element Analysis

Generation of 4D CT image data and analysis of lung tumour mobility during the breathing cycle.

Modeling Lung Motion Using Consistent Image Registration in Four-Dimensional Computed Tomography for Radiation Therapy

Towards Non-Invasive Lung Tumor Tracking Based on Patient Specific Model of Respiratory System

Inverse Analysis of Material Parameters for Lung Tissure and Tumor

Tracking Lung Tissue Motion and Expansion/compression with Inverse Consistent Image Registration and Spirometry

4D-Ct Motion Estimation Using Deformable Image Registration and 5d Respiratory Motion Modeling

Analysis of Free Breathing Motion Using Artifact Reduced 4D CT Image Data.

4d Predictive Patient-Specific Anatomical Model Based On 4d Ct Data: A Feasibility Study

A novel approach for estimating lung tumor motion based on dynamic features in 4D-CT

A patient-specific respiratory model of anatomical motion for radiation treatment planning

Non-invasive imaging of Young's modulus and Poisson's ratio in cancers in vivo

A model that predicts a Real-Time tumour surface using Intra-Treatment skin surface and end-of-Expiration and end-of-Inhalation planning CT images

Quantitation of the Reconstruction Quality of a Four-Dimensional Computed Tomography Process for Lung Cancer Patients.