Abstract:A new design of the catalytic tube system with a crossflow configuration, featured by low catalyst usage and cost, is developed using computational fluid dynamics (CFD). Meanwhile, the kinetics of ethanol steam reforming over a nickel-based catalyst is conducted based on experimental measurements. The effects of six parameters on ethanol conversion and H2 yield are evaluated; they are the reaction pressure, the Reynolds number (Re), the ratio of catalyst thickness to tube diameter (T/D ratio), the ratio of tube diameter to channel width (D/W ratio), the steam-to-ethanol molar ratio (S/E ratio), and the number of tubes. The results indicate that the higher the reaction pressure, the better the ESR performance, as a result of the dominant kinetic mechanism on ESR in the special geometric structure of this study. Increasing the D/W or T/D ratio can effectively improve the ethanol conversion and H2 yield, stemming from the diminish of gas hourly space velocity (GHSV). It is observed that the ethanol conversion has no significant growth when the S/E ratio is over 4, revealing the co-effective choice of the S/E ratio below 4. Increasing the number of tubes raises the ethanol conversion and attains 97% conversion when using four tubes. However, the influence of the altered Reynolds number on the performance is insignificant. When the T/D ratio is lifted to 0.33, the ethanol conversion achieves almost 100%. Overall, the newly designed catalytic tube system with low catalyst usage is a promising reactor that can be applied in ESR for efficient hydrogen production.

UNIFORM DESIGN FOR APPLICATION IN CATALYTIC HYDROGENATION OF ROSIN

System optimization of cyclohexane dehydrogenation under multiphase reaction conditions using the uniform design method

Design Strategies and Structure-Performance Relationships of Heterogeneous Catalysts for Selective Hydrogenation of 1,3-Butadiene

EXPERIMENTAL RESEARCH ON CATALYTIC HYDROGENATION OF LIGHT FRACTION OF BIO-OIL

Development of catalyst applied to modified rosin

A novel acid catalyst based on super/subcritical CO2-enriched water for the efficient esterification of rosin

Efficient catalytic hydrogenation of acrylic rosin over high-activity Pd/C catalyst under mild conditions

Lewis acidic deep eutectic solvents as catalysts for rosin polymerization

Rational Design of Low-Temperature Hydrogenation Catalysts: Theoretical Predictions and Experimental Verification

Study on the Application of Catalytic Esterification Modification of Rosin

Process optimization of 1-cyanocyclohexaneacetic acid hydrogenation using response surface methodology

Room-temperature transfer hydrogenation and fast separation of unsaturated compounds over heterogeneous catalysts in an aqueous solution of formic acid

Batch to Continuous: From Laboratory Recycle Trickle Bed Test Reactor Data to Full-Scale Plant Preliminary Design—A Case Study Based on the Hydrogenation of Resorcinol

Simulation and optimization of operating parameters of isothermal reaction process for acetylene hydrogenation

Modeling and Simulation of a Three Phase Fixed Bed Catalytic Reactor for the Hydrogenation of 2-ethyl-hexenal

Application of Response Surface Methodology and Central Composite Rotatable Design for Modeling and Optimization of Catalyst Compositions in Ethanol Synthesis Via CO Hydrogenation

Rational Design of Catalysts for Heterogeneous Selective Hydrogenation of Unsaturated Aldehydes/Ketones: From Nanoparticles to Single Atoms

Study on Hydrogenation of Gum Rosin Catalyzed by Ni/ Al2 O3 - Mx O Y

Geometric and Electronic Effects in Hydrogenation Reactions

A new design of catalytic tube reactor for hydrogen production from ethanol steam reforming

Dynamic Control of A Selective Hydrogenation Process with Undesired Mapd Impurities in the C-3-Cut Streams