Abstract:Large welded steel tanks for oil storage (oil tank for short in following text) are usually constructed by welding together several varying thickness cylindrical shells. The generated welding residual stress and deformation may affect the buckling behavior of oil tanks. Learning the influence of welding residual stress and deformation on axial buckling helps accounting for discrepancy between elephant's foot buckling critical stress and classic theoretical solution.A buckling analysis method considering welding residual stress and deformation is established. Inherent strain finite element method is illustrated as the proper method to simulate welding residual stress and deformation in buckling analysis and its detail setting procedures in ABAQUS are given. A small model cylinder is analyzed under three conditions (one circumferential weld only, one meridian weld only, and one circumferential weld with two meridian welds), leading to several important conclusions. One of these conclusions is that the extent to which welding residual stress and deformation reduces axial buckling critical stress depends on the weld type greatly. Then the established buckling analysis method is applied to an actual oil tank with patterned welds. Result shows that patterned welds decrease axial buckling critical stress significantly. At last several recommendations are given to decrease the effect of welding residual stress and deformation on axial buckling of oil tanks.

3-D FEM Analysis for Circumferential Rectangular Ligaments on Cylindrical Shell of an Internal Pressure Vessel

Limit pressure and design criterion of cylindrical pressure vessels with nozzles

Finite Element Analysis of Tangential Rectangle Joint Pipe on the Shell of an Cyclone

Research Of Weld On Axial Buckling Stress Of Multilayer Combined Cylindrical Shells

Localized Perturbation Load Approach for Buckling Design of Thin-Walled Steel Cylindrical Shells under Partial Axial Compression

Finite Element Analysis of Modeling Residual Stress Distribution in All-position Duplex Stainless Steel Welded Pipe

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Analysis of the Stress around the Shell-to-bottom Fillet Welds of Large Oil Tanks

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

3D Finite Element Analysis of the Structure with a Manhole Placed on the Joint Area of Head and Shell

3-D Finite Element Analysis of Welding Residual Stress for Half-Pipe Jacket Made of 304 Stainless Steel

Local Stress Analysis of Cylindrical Shells due to Branch Pipe Moments

A Stress Analysis Method for Cylindrical Shells With Nozzles Subjected to Internal Pressure, External Forces and Moments

Finite Element Analyses and Experiments on Welded Spherical Joints with Rectangular Tubes

Finite Element Analysis of Circular Welds in LF6 Aluminum Annular Plate

Analysis of Welding Deformation of 304L Stainless Steel Structure

FEM Analysis on Loading Capacity of Flange Connection in Rectangular-Tube Structures

Stress Analysis and Evaluation of Special Shape Pressure Pipe

Elastic-Plastic Finite Element Analysis of the Internal Pressure Vessels with Large Nozzles

Safety Assessment of the Junction Between a Thick Pressure Vessel Shell and a Thinner Hemispherical Head

3D finite element simulation on stress-strain distributions in all position root butt welding of pip