Abstract:Developing prefabricated bridge deck pavement systems can fundamentally avoid the drawbacks caused by traditional on-site construction such as poor continuity of the construction process and significant differences in pavement layer performance. Prefabricated bridge deck pavement requires that the bridge pavement is completed with the steel deck together in the factory indoors thus it needs the concrete has better self-leveling characteristics which is rare for existing pavement materials. This article develops the ultimate performance selflevelling epoxy asphalt concrete (USEA) which both have excellent self-leveling properties and comprehensive performance. The study initially established the self-leveling asphalt concrete rolling model based on asphalt film thickness theory and Hertz contact theory and the critical rolling mechanical calculation results states that the aggregate particles and the skeleton amounts are the key elements for fluidity of concrete. Comprehensive the analysis of rolling model and research on the curing reaction process of epoxy resin, the study raises the material configuration of USEA and determine the gradation by the Bailey's method. To guarantee the better pavement performance of USEA, the study designs the orthogonal test and establish the Entropy-TOPSIS model to optimize the details mortar schemes of concrete. Through the model calculation, the epoxy resin content and the SBS modified asphalt oil-stone ratio are determined as 20 % and 8.0 % respectively. In this scheme, the high temperature stability is 2805 times & sdot;mm-1, the low temperature bending strain is 3662 mu epsilon and the fatigue life can reach 1.200 million times. The study provides a material selection for the development of prefabricated bridge pavement system and the technical reference for the development of other self-leveling materials which has constructive practical significance.

Study on the Application of the High Performance Concrete in the Simple Supported Slab Bridge of the Highway

Maintenance Strategy of Performance-Based Concrete Bridges in Life Cycle

Application Study on High Modulus Asphalt Concrete in Bridge Pavement

Dynamic Response of Bridge Approach Treated with Deep-Seated Concrete Slab

Experimental Study of Prestressed High-Strength Lightweight Aggregate Concrete Continuous Rigid Frame Bridge

Experimental Study on Residual Bearing Capacity of Existing Prestressed Concrete Hollow Slab Beam

Analysis and strengthening of superstructure diseases of concrete bridges in China

Static and dynamic load test on concrete hollow-core slab bridge

Numerical Analysis for Basalt Fiber Reinforced High-Viscosity Asphalt Concrete Bridge Deck Pavement

Development and Optimization of Ultimate Performance Self-Levelling Epoxy Asphalt Concrete (USEA) for Prefabricated Deck Pavement

Maintenance strategy and method of concrete arch bridges in life cycle i: performance levels and performance requirements

Study on the Performance and Application of High Performance Pavement Portland Cement Concrete

Experiment and Study on Bearing Capacity of Actual Prestressed Concrete Hollow Slab Beam Bridge

The Rehabilitation of Pile Foundation of A Concrete Continous Bridge in Guangzhou City

Strengthening of steel decks for cable-stayed bridge using ultra-high performance concrete: A case study

Structure of AC Pavement with Waterproof Layer on Concrete Bridges

Mix Design and Engineering Application of C80 High-Performance Silicon Fume Concrete

Application Research of Asphalt concrete composite structure in the bridge deck pavement

Static Test Research on Steel Bridge Deck Pavement Structures Paved by High-Content Hybrid Fibre Polymer Concrete

Characteristics and Application of C80 High Performance Concrete

Experimental study on the mechanical behavior and design method of plain steel-plate and concrete composite bridge decks