Abstract:In order to represent the mechanical response laws of high-modulus asphalt pavement (HMAP) faithfully and objectively, the viscoelasticity of high-modulus asphalt mixture (HMAM) was considered, and the viscoelastic mechanical responses were calculated systematically based on moving load by numerical simulations. The performances of the HMAP in resistance to the deformation and the cracking at the bottom layer were compared with the ordinary asphalt pavement. Firstly, Lubao and Honeywell 7686 (H7686) were selected as the high modulus modifiers. The laboratory investigations of Asphalt mix-70 penetration, Asphalt mix-SBS (styrene-butadiene-styrene), HMAM-Lubao and HMAM-H7686 were carried out by dynamic modulus tests and wheel tracking tests. The conventional performances related to the purpose of using the HMAM were indicated. The master curves of the storage moduli were obtained and the viscoelastic parameters were fitted based on viscoelastic theories. Secondly, 3D pavement models based on moving loads for the viscoelastic structures were built using the non-linear finite element software ABAQUS. The wheel path was discretized in time and space to apply the Haversine wave load, and then the mechanical responses of four kinds of asphalt pavement were calculated. Finally, the sensitivity analysis was carried out. The results showed that the addition of the high modulus modifiers can improve the resistance to high-temperature rutting of the pavements. Except for the tensile strain and stress at the bottom of the underlayer, other responses decreased with the increases of the dynamic moduli and the change laws of the tensile strain and stress were affected by the range of the dynamic modulus. The tensile stress at the bottom of the asphalt layer would be too large if the modulus of the layer were too large, and a larger tensile strain would result. Therefore, the range of the modulus must be restricted to avoid the cracking due to excessive tension when using the HMAM. The resistance of the HMAP to deformation was better and the HMAP was less sensitive to load changes and could better withstand the adverse effects inflicted by heavy loads.

Application Study on High Modulus Asphalt Concrete in Bridge Pavement

High Modulus Asphalt Concrete: A State-of-the-art Review

Rheological Behavior of High Modulus Asphalt Binder and Its Indication for Fracture Performances

Application Of Epoxy-Asphalt Composite In Asphalt Paving Industry: A Review With Emphasis On Physicochemical Properties And Pavement Performances

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Experimental Study on Pavement Performances of SBP Modified Asphalt

Viscoelastic Mechanical Responses of HMAP under Moving Load.

Development and Optimization of Ultimate Performance Self-Levelling Epoxy Asphalt Concrete (USEA) for Prefabricated Deck Pavement

Experimental Study on Fatigue Characteristics of Asphalt Concrete in Bridge Pavement

Research on Improving the Durability of Bridge Pavement Using a High-Modulus Asphalt Mixture

Numerical Analysis for Basalt Fiber Reinforced High-Viscosity Asphalt Concrete Bridge Deck Pavement

Performance Research Of High-Viscosity Asphalt Mixture As Deck-Paving Materials For Steel Bridges

Research on Preparation and High Temperature Behavior of High-Modulus Asphalt

Design of High-Modulus Asphalt Concrete for the Middle Layer of Asphalt Pavement

Performance of Hot Mix Epoxy Asphalt Binder and Its Concrete

Investigation on the Preparation and Performances of Epoxy-Modified Asphalt Binder and Its Mixtures

Application Research of Asphalt concrete composite structure in the bridge deck pavement

Mechanical Properties of High-Modulus Asphalt Concrete Containing Recycled Asphalt Pavement: A Parametric Study

STUDY ON THE PERFORMANCE OF HIGH-MODULUS ASPHALT CONCRETE PAVEMENT IN EXTREME CURVES OR STEEP SLOPES OF TRUNK HIGHWAY

Laboratory Research of Hard Asphalt Mixture in China

The Effects of Bituminous Binder on the Performance of Gussasphalt Concrete for Bridge Deck Pavement