Abstract:Mg–Li-based alloys were investigated for future cardiovascular stent application as they possess excellent ductility. However, Mg–Li binary alloys exhibited reduced mechanical strengths due to the presence of lithium. To improve the mechanical strengths of Mg–Li binary alloys, aluminum and rare earth (RE) elements were added to form Mg–Li–Al ternary and Mg–Li–Al–RE quarternary alloys. In the present study, six Mg–Li–(Al)–(RE) alloys were fabricated. Their microstructures, mechanical properties and biocorrosion behavior were evaluated by using optical microscopy, X-ray diffraction, scanning electronic microscopy, tensile tests, immersion tests and electrochemical measurements. Microstructure characterization indicated that grain sizes were moderately refined by the addition of rare earth elements. Tensile testing showed that enhanced mechanical strengths were obtained, while electrochemical and immersion tests showed reduced corrosion resistance caused by intermetallic compounds distributed throughout the magnesium matrix in the rare-earth-containing Mg–Li alloys. Cytotoxicity assays, hemolysis tests as well as platelet adhesion tests were performed to evaluate in vitro biocompatibilities of the Mg–Li-based alloys. The results of cytotoxicity assays clearly showed that the Mg–3.5Li–2Al–2RE, Mg–3.5Li–4Al–2RE and Mg–8.5Li–2Al–2RE alloys suppressed vascular smooth muscle cell proliferation after 5day incubation, while the Mg–3.5Li, Mg–8.5Li and Mg–8.5Li–1Al alloys were proven to be tolerated. In the case of human umbilical vein endothelial cells, the Mg–Li-based alloys showed no significantly reduced cell viabilities except for the Mg–8.5Li–2Al–2RE alloy, with no obvious differences in cell viability between different culture periods. With the exception of Mg–8.5Li–2Al–2RE, all of the other Mg–Li–(Al)–(RE) alloys exhibited acceptable hemolysis ratios, and no sign of thrombogenicity was found. These in vitro experimental results indicate the potential of Mg–Li–(Al)–(RE) alloys as biomaterials for future cardiovascular stent application and the worthiness of investigating their biodegradation behaviors in vivo.

Compared Study of Vascular Cell Response to Mg-Zn-Y-Nd and WE43 as Biodegradable Stents

An in vitro study on the biocompatibility of WE magnesium alloys

Study on the Mg-Li-Zn Ternary Alloy System with Improved Mechanical Properties, Good Degradation Performance and Different Responses to Cells.

In vitro cytocompatibility, hemocompatibility and antibacterial properties of biodegradable Zn-Cu-Fe alloys for cardiovascular stents applications

Recent Progress on Mg- and Zn-Based Alloys for Biodegradable Vascular Stent Applications

Mechanical Property, Biocorrosion and in Vitro Biocompatibility Evaluations of Mg-Li-(Al)-(Re) Alloys for Future Cardiovascular Stent Application

Investigation of Mg–Zn–Y–Nd alloy for potential application of biodegradable esophageal stent material

Influence of fine-grain and solid-solution strengthening on mechanical properties and in vitro degradation of WE43 alloy

Enhanced in Vitro and in Vivo Performance of Mg-Zn-Y-Nd Alloy Achieved with Aptes Pretreatment for Drug-Eluting Vascular Stent Application

Comparative Study on Corrosion Behaviour of Pure Mg and We43 Alloy in Static, Stirring and Flowing Hank'S Solution

Biodegradation of Az31 and We43 Magnesium Alloys in Simulated Body Fluid

Design and Mechanical Performance Evaluation of WE43 Magnesium Alloy Biodegradable Stents via Finite Element Analysis

Effects of degradation products of biomedical magnesium alloys on nitric oxide release from vascular endothelial cells

In Vitro Study on Mg-Sn-Mn Alloy As Biodegradable Metals

Enhanced Bioactivity of Mg-Nd-Zn-Zr Alloy Achieved with Nanoscale MgF2 Surface for Vascular Stent Application.

Research on a Zn-Cu alloy as a biodegradable material for potential vascular stents application

Nanophasic Biodegradation Enhances the Durability and Biocompatibility of Magnesium Alloys for the Next-Generation Vascular Stents.

In Vitro Corrosion and Biocompatibility of Binary Magnesium Alloys.

Biocompatibility and corrosion resistance of drug coatings with different polymers for magnesium alloy cardiovascular stents

Degradation behaviors and in-vivo biocompatibility of a rare earth- and aluminum-free magnesium-based stent

Study on the in Vitro Degradation Behavior of Pure Mg and WE43 in Human Bile for 60 Days for Future Usage in Biliary