Abstract:Failure of sealing materials is a principal cause to the leakage of electrical penetration assemblies (EPA) in nuclear plants, and the essence can be attributed to small deformations or defects taking place in the sealing materials (glass, epoxy, etc.) as a result of harsh environment influence (high temperature, pressure and ionizing radiation), which leads to leakage when the stress/strain exceeds the threshold value. Metal-to-glass sealing EPA has unique advantages of higher temperature and pressure endurance than organic material sealing EPA, and has been applied in the pressure vessel of High-Temperature Reactor Pebble-bed Modules (HTR-PM) at the Shidao Bay Nuclear Power Plant in China. To achieve on-line state monitoring, we proposed a new method to monitor the stress in the sealing glass by optical fiber sensing technique. Our research showed that the stress in sealing glass could be measured via embedding an optical fiber Bragg grating (FBG) sensor in glass. Optical fiber sensing technique has been widely used for stress measurement in many fields, however applications in metal-to-glass sealing EPA have not been reported in the literature yet. Taking advantage of the small size of a fiber sensor, the embedding of fiber will not affect the sealing structure. And taking advantage of the similar chemical content, fiber and glass can be fused together easily without affecting insulation. In this paper, a brief review on applications of FBG in nuclear facilities was present. The model of FBG embedded EPA was built based on finite element method. Sensitivity analysis about the impact of environment parameters including temperature and pressure on stress had been studied numerically. And the theoretical Bragg wavelength shift of the embedded sensor was derived from the strain/stress distribution. Experiments had been carried out in some main aspects, including pressure and thermal test, from which the relationship between environment parameters and Bragg wavelength shifts was obtained. This research makes an initial attempt for realizing an on-line real-time long-term state monitoring and sets a base for the life cycle diagnostics of EPA in nuclear reactors.

The Measurement and Discrimination of Asymmetric Non-Uniform Strain Distribution Based on Spectrum Characterization of Fbg Sensor

Simulation and Reconstruction for Nonuniform Strain Profile of Fiber Bragg Grating Sensor

Structural Instability-Enabled Mechanical Sensors Using Fiber Bragg Grating

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Embedded fibre Bragg grating sensors for non-uniform strain sensing in composite structures

A study on fiber Bragg grating (FBG) strain sensor based on symmetrical lever structure

Non-uniform strain field reconstruction of FBG using an adaptive Nelder–Mead algorithm

Temperature-Insensitive Strain Sensor Based on the Measurement of Reflected Bandwidth from Tapered Fiber Grating by A Scanning Fbg

Measurement-Error Analysis of Fiber Bragg Grating Flexible Sensor for Displacement-Field Monitoring of Geotechnical Engineering

An Investigation of Optical-Mechanical Transfer of Surface-Bonded Fiber Bragg Grating Sensors for Aerostat Envelope Strain Monitoring

In Situ Characterization of Residual Stress in Glass-to-metal Seal

Stress Monitoring of Sealing Materials in Electrical Penetration Assemblies

Experimental Study on Feasibility of Fiber Bragg Grating-Based Foundation Deformation Monitoring

Strain Transfer Mechanism of Quadrate-Packaged FBG Sensors Embedded in Rectangular Structures

A Method of Strain Measurement Based on Fiber Bragg Grating Sensors

Calculation of the Mean Strain of Smooth Non-uniform Strain Fields Using Conventional FBG Sensors

Strain transfer mechanism analysis of a surface-bonded FBG sensor under non-axial force

Strain measurement in flexibility material using fiber Bragg gratings

Influence of fiber Bragg grating spectrum degradation on the performance of sensor interrogation algorithms

Parametric reflection of the quasi-distributed optical fiber sensors with flexible packaging layer for bending strain measurement

Analysis Of Residual Stress In Electrical Penetration Assembly Based On A Fiber Bragg Grating Sensor