Abstract:Failure of sealing materials is a principal cause to the leakage of electrical penetration assemblies (EPA) in nuclear plants, and the essence can be attributed to small deformations or defects taking place in the sealing materials (glass, epoxy, etc.) as a result of harsh environment influence (high temperature, pressure and ionizing radiation), which leads to leakage when the stress/strain exceeds the threshold value. Metal-to-glass sealing EPA has unique advantages of higher temperature and pressure endurance than organic material sealing EPA, and has been applied in the pressure vessel of High-Temperature Reactor Pebble-bed Modules (HTR-PM) at the Shidao Bay Nuclear Power Plant in China. To achieve on-line state monitoring, we proposed a new method to monitor the stress in the sealing glass by optical fiber sensing technique. Our research showed that the stress in sealing glass could be measured via embedding an optical fiber Bragg grating (FBG) sensor in glass. Optical fiber sensing technique has been widely used for stress measurement in many fields, however applications in metal-to-glass sealing EPA have not been reported in the literature yet. Taking advantage of the small size of a fiber sensor, the embedding of fiber will not affect the sealing structure. And taking advantage of the similar chemical content, fiber and glass can be fused together easily without affecting insulation. In this paper, a brief review on applications of FBG in nuclear facilities was present. The model of FBG embedded EPA was built based on finite element method. Sensitivity analysis about the impact of environment parameters including temperature and pressure on stress had been studied numerically. And the theoretical Bragg wavelength shift of the embedded sensor was derived from the strain/stress distribution. Experiments had been carried out in some main aspects, including pressure and thermal test, from which the relationship between environment parameters and Bragg wavelength shifts was obtained. This research makes an initial attempt for realizing an on-line real-time long-term state monitoring and sets a base for the life cycle diagnostics of EPA in nuclear reactors.

On-line monitoring of sealing glass in electrical penetration assembly based on femto-laser inscribed fiber Bragg grating sensors.

Stress Monitoring of Sealing Materials in Electrical Penetration Assemblies

Structural Instability-Enabled Mechanical Sensors Using Fiber Bragg Grating

Structural health monitoring of metal-to-glass–ceramics penetration during thermal cycling aging using femto-laser inscribed FBG sensors

Analysis Of Residual Stress In Electrical Penetration Assembly Based On A Fiber Bragg Grating Sensor

Optimized Sealing Process And Real-Time Monitoring Of Glass-To-Metal Seal Structures

FBG sensor based dynamic monitoring and analysis on sliding construction of a Prestressed Reticulated Shell-String structure

Residual Stress Measurement of Sealing Glass Based on Optical Fiber Sensing Technology

A Novel Method of Embedding Distributed Optical Fiber Sensors for Structural Health Monitoring

A Monitoring Method Based On Fbg For Concrete Corrosion Cracking

In Situ Characterization of Residual Stress in Glass-to-metal Seal

Safety monitoring of railway tunnel construction using FBG sensing technology

The Measurement and Discrimination of Asymmetric Non-Uniform Strain Distribution Based on Spectrum Characterization of Fbg Sensor

Life-cycle Stress Monitoring Method for Tunnel Secondary Lining Based on Distributed Optical Fiber Sensor

Detection of Glaze Icing Load and Temperature of Composite Insulators Using Fiber Bragg Grating

Strain and Temperature Sensing Based on Different Temperature Coefficients fs-FBG Arrays for Intelligent Buoyancy Materials

Real-Time Temperature Monitoring under Thermal Cycling Loading with Optical Fiber Sensor

A Hermetic Package Technique for Multi-Functional Fiber Sensors through Pressure Boundary of Energy Systems Based on Glass Sealants

Nuclear Power Plant Prestressed Concrete Containment Vessel Structure Monitoring during Integrated Leakage Rate Testing Using Fiber Bragg Grating Sensors

Distributed fiber optic sensing for internal strain monitoring in full life cycle of concrete slabs with BOFDA technology

Embedded Pt-PVDF sensor without compromising mechanical properties of GFRP for on-line sensing