Abstract:This work describes a systematic alloy design strategy resulting in the development of a high strength aluminum alloy adopted for L-PBF. First, based on the composition of a reference Al-Cu-Mg alloy, three Al-Cu-Mg-Mn-Zr-based alloys were investigated using computational thermodynamic tools. Subsequently, the L-PBF processing behavior, microstructure, and concomitant mechanical properties of the L-PBF-fabricated alloys were investigated. Alloys with different compositions showed substantial differences in microstructure: the alloy without Zr addition showed a coarse columnar microstructure and suffered from solidification cracking, alloys with low to mediate Zr additions (1–1.98 wt%) showed a mixed columnar and equiaxed microstructure, while alloys with high Zr addition (3.72 wt%) showed a fully equiaxed microstructure, accompanied by a grain size reduction down to 0.7 ± 0.3 µm. All alloys containing ≥ 1.98 wt% Zr were crack-free. The L-PBF-processed Al-4.40Cu-1.51Mg-1.15Mn-3.72Zr (wt%) alloy showed an extended Zr solid solubility in the Al matrix of ~ 1.3 ± 0.1 wt%. Coherent primary Al3Zr particles with a cubic L12 structure were formed in all the Zr-containing alloys. The mechanical properties of as-built alloys increased consistently with increasing Zr contents from 0 to 3.72 wt%. The designed Al-4.40Cu-1.51Mg-1.15Mn-3.72Zr (wt%) alloy combined a yield strength of 561 ± 24 MPa, an ultimate tensile strength of 580 ± 16 MPa, and an elongation at break of 6.0 ± 1.3%. The exceptionally high strength of this alloy is attributed to a combination of grain refinement, Orowan, solid solution, and dislocation strengthening. The current work shows the intrinsic potential of rapid solidification occurring during L-PBF for the fabrication of geometrically-complex, high-strength lightweight parts made of ultra-fine-grained hyper-peritectic aluminum alloys containing transition element additions.

Crack-free High-Strength AA-7075 Fabricated by Laser Powder Bed Fusion with Inoculations of Metallic Glass Powders

Characterization of crack-free AA-7075 fabricated by laser powder bed fusion with addition of Zr50.7Cu28Al12.3Ni9 metallic glass

Processing and characterization of crack-free 7075 aluminum alloys with elemental Zr modification by laser powder bed fusion

Crack-free and high-strength AA2024 alloy obtained by additive manufacturing with controlled columnar-equiaxed-transition

Enhancing Strength and Ductility of Graphene and ZrO2 Nanoparticles Hybrid Reinforced AA2024 Composite Fabricate by Laser Powder Bed Fusion

A crack-free and high-strength Al-Cu-Mg-Mn-Zr alloy fabricated by laser powder bed fusion

Design high-strength Al-Mg-Si alloy fabricated by laser powder bed fusion: Cracking suppression and strengthening mechanism

Facile and cost-effective approach to additively manufacture crack-free 7075 aluminum alloy by laser powder bed fusion

Superior Mechanical Properties and Corrosion Resistance of Laser Powder Bed Fusion 7075 Al/Tc4 Alloy Through Microstructure Design

Exploiting the rapid solidification potential of laser powder bed fusion in high strength and crack-free Al-Cu-Mg-Mn-Zr alloys

Microstructure characterization and mechanical properties of crack-free Al-Cu-Mg-Y alloy fabricated by laser powder bed fusion

Fabrication of crack-free aluminum alloy 6061 parts using laser foil printing process

Microstructure, mechanical properties, and crack formation of aluminum alloy 6063 produced via laser powder bed fusion

Design Strategy for Eliminating Cracking and Improving Mechanical Properties of Al-Mg-Si Alloys Fabricated by Laser Melting Deposition

Achieving High Strength in Laser Powder-Bed Fusion Processed AlFeCuZr Alloy Via Dual-Nanoprecipitations and Grain Boundary Segregation

In situ design of ultrafine-grained 7075 Al alloy with laser powder bed fusion

Laser powder bed fusion of crack-free TiN/Al7075 composites with enhanced mechanical properties

Effect of Powder Spreading Parameters on Laser Absorption Behavior and Processability of High‐Strength Aluminum Alloy Fabricated by Laser Powder Bed Fusion

An aluminum-lithium alloy produced by laser powder bed fusion

Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts

A Novel High-Strength Al-Li Alloy Printed by Laser Powder Bed Fusion: Microstructural Evolution and Strengthening Mechanism