Abstract:Diamond-silicon carbide (SiC) polycrystalline composite blends are studied using a computational approach combining molecular dynamics (MD) simulations for obtaining grain boundary (GB) fracture properties and phase field mechanics for capturing polycrystalline deformation and failure. An authentic microstructure, reconstructed from experimental lattice diffraction data with locally refined discretization in GB regions, is used to probe effects of local heterogeneities on material response in phase field simulations. The nominal microstructure consists of larger diamond and SiC (cubic polytype) grains, a matrix of smaller diamond grains and nanocrystalline SiC, and GB layers encasing the larger grains. These layers may consist of nanocrystalline SiC, diamond, or graphite, where volume fractions of each phase are varied within physically reasonable limits in parametric studies. Distributions of fracture energies from MD tension simulations are used in the phase field energy functional for SiC-SiC and SiC-diamond interfaces, where grain boundary geometries are obtained from statistical analysis of lattice orientation data on the real microstructure. An elastic homogenization method is used to account for distributions of second-phase graphitic inclusions as well as initial voids too small to be resolved individually in the continuum field discretization. In phase field simulations, SiC single crystals may twin, and all phases may fracture. The results of MD calculations show mean strengths of diamond-SiC interfaces are much lower than those of SiC-SiC GBs. In phase field simulations, effects on peak aggregate stress and ductility from different GB fracture energy realizations with the same mean fracture energy and from different random microstructure orientations are modest. Results of phase field simulations show unconfined compressive strength is compromised by diamond-SiC GBs, graphitic layers, graphitic inclusions, and initial porosity. Explored ranges of porosity and graphite fraction are informed by physical observations and constrained by accuracy limits of elastic homogenization. Modest reductions in strength and energy absorption are witnessed for microstructures with 4% porosity or 4% graphite distributed uniformly among intergranular matrix regions. Further reductions are much more severe when porosity is increased to 8% relative to when graphite is increased to 8%.

Multi-scale Numerical Simulation of Fracture Behavior for the Gadolinia-Doped Ceria (GDC) under Mechano-Electrochemical Coupling Fields at High Temperature

Anisotropic Mechanical Behavior of Gadolinia-Doped Ceria Solid Electrolytes under Electromechanical Coupling Field Using Atomistic Simulations

Molecular Dynamics Simulations of the Deformation Behavior of Gadolinia-Doped Ceria Solid Electrolytes under Tensile Loading

Multi-scale simulations of fracture behavior in CeO2

The fracture behavior of non-stoichiometric gadolinia-doped ceria solid electrolytes using molecular dynamics simulations

Molecular Dynamics Simulation of Crack Tip Processes in Ceria and Gadolinia Doped Ceria

Development of Multi-Scale Computation Framework to Investigate the Failure Behavior of the Materials

Molecular dynamics simulation of a gadolinia-doped ceria

Thermomechanical Properties of Non-Stoichiometric Gadolinium Doped Ceria by Molecular Dynamics Simulations

Mechanical behavior of cracked solid electrolyte under the coupled mechanical and chemical fields

Molecular Dynamics Simulations of Uniaxial Compression of Ceria and Gadolinia Doped Ceria

A Multi-Scale Approach for Phase Field Modeling of Ultra-Hard Ceramic Composites

Multi-scale numerical simulation of fracture behavior of nickel-aluminum alloy by coupled molecular dynamics and cohesive finite element method (CFEM)

Electrical and microstructural characterization of ceramic gadolinium-doped ceria electrolytes for ITSOFCs by sol-gel route

Microstructural Toughening Mechanisms in Nanostructured Al2O3/GdAlO3 Eutectic Composite Studied Using in Situ Microscale Fracture Experiments

Effects of Sintering Parameters on the Low-Temperature Densification of GDC Electrolyte Based on an Orthogonal Experiment

Crack-tip Cleavage/dislocation Emission Competition Behaviors/mechanisms in Magnesium:Alefm Prediction and Atomic Simulation

Multiscale Investigations into the Fracture Toughness of SiC/graphene Composites: Atomistic Simulations and Crack-Bridging Model

Crack tip cavitation in metallic glasses

Multi-scale Simulation of Anisotropic Fracture Behavior in BaZrO3

Cross-scale method of MD-FE for modeling mechanical damage behaviors of ferrite-cementite steels