Abstract:Biomasses are promising precursors of porous carbons. However, the complexity in composition and microstructure of biomasses might result in poor quality reproducibility of biomass-derived porous carbons. It is essential to develop reliable approaches to prepare biomass-derived porous carbons. In this work, a nitrogen-doped porous carbon derived from cellulose microfibers of rice straw was prepared. The cellulose microfibers were first extracted from rice straw by alkali treatment. Then, a hydrochar was fabricated by hydrothermal treatment of the cellulose microfibers. Nitrogen-doped porous carbon was finally obtained by calcination under high temperature with K2CO3 and CO(NH2)2 as the activating agent and nitrogen dopant, respectively. The prepared carbon material has an ultrahigh specific surface area (∼2800 m2/g) and a moderate nitrogen doping (1.65 atom %). Consequently, rice-straw-derived porous carbon achieves a remarkable specific capacitance (380.1 F/g at 0.5 A/g) and a good rate capability (61.8% capacitance retention at 50 A/g). In addition, the porous carbon exhibits good cycling stability. The loss of capacitance is only 4.6% after 10 000 charge–discharge cycles. This study provides a robust method for the preparation of porous carbons from lignocellulosic biomasses.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.1c00323?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.1c00323</a>.SEM images of the carbonization product of raw rice straw (Figure S1), SEM images of the carbons prepared with different quantities of K2CO3 (Figure S2), rate capabilities of KRS-x and NKRS-y (Figure S3), CV curves and GCD profiles of RS and KRS (Figures S4 and S5), equivalent electric circuit diagram (Figure S6 and Table S1), comparison in capacitive performance between NKRS and NKRS-N (Figure S7), and comparison of various carbon materials in specific capacitance (Table S2) (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.1c00323/suppl_file/ef1c00323_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Fully Utilizing the Organic and Inorganic Fractions in Rice Husk for Electrode Materials Towards an Excellent Asymmetric Solid-State Supercapacitor

Green Synthesis of Nitrogen-doped Porous Carbon Derived from Rice Straw for High-performance Supercapacitor Application

Co2SiO4/CoO Heterostructure Anchored on Graphitized Carbon Derived from Rice Husks with Hierarchical Pore As Electrode Material for Supercapacitor

Rice Hull-Derived Carbon for Supercapacitors: Towards Sustainable Silicon-Carbon Supercapacitors

Synthesis of rice husk derived porous carbon as low-cost and high-performance electrode material for supercapacitors

Rice Husk-Derived Mn3o4/Manganese Silicate/C Nanostructured Composites For High-Performance Hybrid Supercapacitors

Synthesis of Fe/N Co-doped Porous Carbon Spheres Derived from Corncob for Supercapacitors with High Performances

Hierarchical Micro-/Mesoporous Carbon Derived from Rice Husk by Hydrothermal Pre-Treatment for High Performance Supercapacitor

Facile fabrication of NiCo-LDH on activated rice husk carbon for high-performance all-solid-state asymmetric supercapacitors

In situ SiO2 etching strategy to prepare rice husk-derived porous carbons for supercapacitor application

Promising Rice-Husk-Derived Carbon/Ni(OH) 2 Composite Materials as a High-Performing Supercapacitor Electrode

Rice Husk-Based Hierarchical Porous Carbon for High Performance Supercapacitors: the Structure-Performance Relationship

Porous carbon made from rice husk as electrode material for electrochemical double layer capacitor

Synthesis and electrochemical performance of biomass-derived porous carbon materials for supercapacitors

Facile Synthesis of Porous Carbon Derived from Rice Husks with Enhanced Capacitance Performance

A Comprehensive Green Utilization Strategy of Lignocellulose from Rice Husk for the Fabrication of High-Rate Electrochemical Zinc Ion Capacitors

From Rice Bran to High Energy Density Supercapacitors: A New Route to Control Porous Structure of 3D Carbon

One/Two-Step Contribution to Prepare Hierarchical Porous Carbon Derived from Rice Husk for Supercapacitor Electrode Materials

Sawdust-Derived Activated Carbon with Hierarchical Pores for High-Performance Symmetric Supercapacitors

Nitrogen-Doped Porous Carbon Derived from Cellulose Microfibers of Rice Straw for High-Performance Electrodes of Supercapacitors

Tunable Porous Structure of Carbon Nanosheets Derived from Puffed Rice for High Energy Density Supercapacitors