Abstract:The double-wall structure has attracted wide attention, especially in the cooling design of the turbine vane, because of its excellent cooling performance. However, extreme flow resistance becomes the main obstacle limiting the application of double-wall structure. Previous studies focus on further improving the cooling performance of the impingement/effusion cooling system, and few improved schemes have been made to reduce the flow resistance. In this paper, a novel cooling structure with hollow pin fins is proposed, which takes into account both the improvement of the cooling effect and the reduction of flow resistance. The three-dimensional steady-state numerical simulation obtains the film cooling effectiveness, Nusselt number, overall cooling effectiveness, and coolant flow coefficient of the novel and traditional double-wall structures. The gird uses tetrahedral elements, and the turbulence model selects the shear stress transport (SST) k-ω model for numerical calculation. The effects of different hollow pin fin arrangements on the cooling performance and flow resistance characteristics are investigated to study the novel cooling structure. The main conclusions are as follows: In terms of external cooling, placing pin fin holes near the film holes can reduce the vortex intensity and improve the film coverage. The surface-averaged film cooling effectiveness is increased by 112.5% compared to the traditional cooling structure. In internal cooling, the novel cooling structure has a more considerable spanwise distance between the impingement holes and a lower impinging jet velocity, reducing the target plate's heat transfer. However, the novel cooling structure still has excellent internal cooling owing to the increase of heat transfer area by the pin fin. The novel cooling structure maintains internal cooling and significantly improves external cooling, increasing the surface-averaged overall cooling effectiveness by up to 14.5%. In terms of coolant flow resistance, adding the hollow pin fin provides a lower total pressure loss option for coolant outflow. The novel cooling structure brings the maximum increase of flow coefficient of 32.4% and reduces the flow resistance significantly.

THE EFFECT OF IMPINGEMENT-EFFUSION COOLING STRUCTURE ON ADIABATIC FILM EFFECTIVENESS

Overall Cooling Effectiveness Characteristic and Influence Mechanism on an Endwall With Film Cooling and Impingement

On Improving Full-Coverage Effusion Cooling Efficiency by Varying Cooling Arrangements and Wall Thickness in Double Wall Cooling Application

Effect of different internal impingement structures and cratered film cooling holes on overall cooling effectiveness

Experimental and numerical investigations of overall cooling effectiveness on a vane endwall with jet impingement and film cooling

Flow and heat transfer characteristics of double-wall cooling with multi-row short film cooling hole arrangements

Investigation on cooling characteristic of the novel double-wall with the hollow pin fin

ON THE RELIABILITY OF RANS TURBULENCE MODELS FOR ENDWALL COOLING PREDICTION

Influence of Jet Impingement Configurations and Aerothermal Variables on Film Cooling

Experimental Heat Transfer and Cooling Effectiveness over an Effusion Wall with Internal Jet-Array Impingement: Influence of Hole Arrangement

A conjugate heat transfer investigation of outer-wall cooling performance in double-wall vane pressure side

Influence of Different Film Cooling Arrangements on Endwall Cooling

Effects of Wall Curvature and Streamwise Pressure Gradient on Film Cooling Effectiveness

NUMERICAL INVESTIGATION OF DIFFERENT TURBULENCE MODELS APPLIED IN COMBINED IMPINGEMENT AND FILM COOLING

Experimental and numerical study on film cooling effectiveness of an annular cascade endwall with different slot configuration

Experimental investigation on the combined cooling methods of jet impingement and film cooling for the pressure surface of the turbine vane leading cavity

Experimental and numerical study of the cooling characteristics of the double-walled cooling structure on integral support plate

Effects of film hole spanwise angle and diameter on flow and heat transfer of impingement/effusion cooling with crossflow diverters

The interaction between upstream and downstream film cooling rows in flow field and heat transfer

Experimental and Numerical Investigations of Shaped Hole Film Cooling with the Influence of Endwall Cross Flow

Experimental and numerical investigations of cooling characteristics on endwall partitioned film cooling with shaped holes