Characteristics of NOX and NH3 Emissions from In-Use Heavy-Duty Diesel Vehicles with Various Aftertreatment Technologies in China.

Liqiang He,Gang Li,Xiaomeng Wu,Shaojun Zhang,Miao Tian,Zhenhua Li,Cheng Huang,Qingyao Hu,Ye Wu,Jiming Hao

DOI: https://doi.org/10.1016/j.jhazmat.2023.133073

IF: 13.6

2024-01-01

Journal of Hazardous Materials

Abstract:Some in-use China IV and China V heavy-duty diesel vehicles (HDDVs) with selective catalytic reduction (SCR) systems probably fail to mitigate nitrogen oxide (NOX) emissions as expected. Meanwhile, these SCR-equipped HDDVs might emit excessive ammonia (NH3). To better understand the NOX and NH3 emissions from typical HDDVs in China, seventeen in-use vehicles with various emission-control technologies were tested by using laboratory chassis dynamometers. The results indicated that individual NOX and NH3 emissions from HDDV fleets widely varied owing to differences in aftertreatment performance. China V and VI HDDVs with effectively functioning SCRs could substantially control their NOX emissions to be below the corresponding emission limits (i.e., 4.0 and 0.69 g/kWh for China V and China VI vehicles, respectively) but with a potential risk of high NH3 emissions caused by diesel exhaust fluid (DEF) overdosing. Furthermore, higher vehicle speed and payload resulted in lower NOX emissions and possibly higher NH3 emissions from HDDVs with effectively functioning SCRs, while higher NOX emissions from tampered-and non-SCR HDDVs. NOX emissions from China VI HDDVs were more sensitive to cold starts compared to China V and earlier vehicles, but there was no significant discrepancy in NH3 emissions between cold-and hot-start tests.