Characteristics of NO X and NH 3 emissions from in-use heavy-duty diesel vehicles with various aftertreatment technologies in China

Liqiang He,Gang Li,Xiaomeng Wu,Shaojun Zhang,Miao Tian,Zhenhua Li,Cheng Huang,Qingyao Hu,Ye Wu,Jiming Hao

DOI: https://doi.org/10.1016/j.jhazmat.2023.133073

IF: 13.6

2023-12-02

Journal of Hazardous Materials

Abstract:Some in-use China IV and China V heavy-duty diesel vehicles (HDDVs) with selective catalytic reduction (SCR) systems probably fail to mitigate nitrogen oxide (NO X ) emissions as expected. Meanwhile, these SCR-equipped HDDVs might emit excessive ammonia (NH 3 ). To better understand the NO X and NH 3 emissions from typical HDDVs in China, seventeen in-use vehicles with various emission-control technologies were tested by using laboratory chassis dynamometers. The results indicated that individual NO X and NH 3 emissions from HDDV fleets widely varied owing to differences in aftertreatment performance. China V and VI HDDVs with effectively functioning SCRs could substantially control their NO X emissions to be below the corresponding emission limits (i.e., 4.0 and 0.69 g/kWh for China V and China VI vehicles, respectively) but with a potential risk of high NH 3 emissions caused by diesel exhaust fluid (DEF) overdosing. Furthermore, higher vehicle speed and payload resulted in lower NO X emissions and possibly higher NH 3 emissions from HDDVs with effectively functioning SCRs, while higher NO X emissions from tampered- and non-SCR HDDVs. NO X emissions from China VI HDDVs were more sensitive to cold starts compared to China V and earlier vehicles, but there was no significant discrepancy in NH 3 emissions between cold- and hot-start tests.

environmental sciences,engineering, environmental