Abstract:In this study, repeat-pass synthetic aperture radar interferometry (repeat-pass THz InSAR) is first extended to the terahertz band, and it has tremendous potential in the application of high-resolution three-dimensional (3D) imaging due to its shorter wavelength, larger bandwidth, and greater sensitivity to elevation variation. The super-resolution and high sensitivity of THz InSAR pose greater demands on the baseline calibration for high-precision digital elevation model (DEM) generation. To meet the elevation accuracy requirement of THz InSAR, we propose a baseline calibration method relying on the estimation of the azimuth fringe frequency (EAFF) of the interferometric phase. Initially, a model for non-parallel sampling path errors within the squint SAR repeat-pass interferometry was established, and then, we conducted the theoretical analysis of the phase errors induced by the non-parallel errors. Following this, using a reference DEM, the relationship between the fringe frequency of the error phase and the bias in the repeat-path positioning was established. This allowed the estimation of the position errors to be transformed into the frequency spectrum estimation based on the FFT, which would mitigate the impact of unknown SAR sampling positions. Ultimately, we investigated the accuracy of the proposed EAFF calibration method, and the simulation showed that it can achieve the theoretical accuracy when the correlation coefficient exceeds 0.3. Furthermore, we configured the repeat-pass THz InSAR system with the 0.3 THz stepped-frequency radar. Compared to the conventional calibration based on ground control points (GCPs), the 3D reconstruction of both a knife and a terrain model, calibrated using the proposed EAFF algorithm, demonstrated that the elevation accuracy can achieve millimeter-level precision across the entire image swath. The above results also proved the great potential of THz InSAR in high-precision 3D imaging and remote sensing.

A Photonic Terahertz Interferometric Inverse Synthetic Aperture Radar Scheme for High Resolution 3D Positioning

Photonic THz InISAR for 3D Positioning with High Resolution

Trilateration-Based Photonic THz Radar for 3D Positioning

A Terahertz Photonic Imaging Radar System Based on Inverse Synthetic Aperture Technique

Fast 3D positioning based on a simplified THz photonic stereo ISAR system

Terahertz Photonics in Radar and ISAC Applications

Broadband Terahertz Radar with Photonics-enabled Mm-Scale Resolution

A 144GHz 0.76cm-resolution sub-carrier SAR phase radar for 3D imaging in 65nm CMOS.

Radar-Centric Photonic Terahertz Integrated Sensing and Communication System Based on LFM-PSK Waveform

Design of 3D Laser Radar Based on Laser Triangulation

3D Imaging for 77 GHz MIMO-SAR

3D THz-TDS SAR Imaging by an Inverse Synthetic Cylindrical Aperture

A Novel High-Resolution ISAR Imaging Method for Large-Size Space Target in the Terahertz Band Based on Defocused PSF

Dual-Band THz Photonic Pulses Enabling Synthetic Mm-Scale Range Resolution

A High-Precision Baseline Calibration Method Based on Estimation of Azimuth Fringe Frequency with THz Interferometry SAR

Three-Dimensional Surface Reconstruction of Space Targets Using a Terahertz MIMO Linear Array Based on Multilayer Wideband Frequency Interferometry Techniques

Adaptive 3D Imaging for Moving Targets Based on a SIMO InISAR Imaging System in 0.2 THz Band

Three-Dimensional High-Resolution Space-Borne ISAR Imaging With Compact Antenna Configuration for Large Rotational Angle

Photonics-based broadband radar for high-resolution and real-time inverse synthetic aperture imaging

High-precision ISAR Imaging of Translational Target Using Subaperture Segmentation and Motion Reconstruction

High-Resolution and Wide-Swath 3D Imaging for Urban Areas Based on Distributed Spaceborne SAR