Abstract:Optical sensors based on fiber Bragg gratings have become an important type of sensing element for strain measurements. In this study, fiber Bragg grating strain sensors and corresponding reference temperature sensors were integrated into a pantograph strip. The results of an online test indicated that the temperature of the pantograph strip impacting the strain measurement reaches about 80 °C while the vehicle was running. In addition, Fourier analysis showed that the energies of the temperature measurement signals dominated the relatively low-frequency band (less than 0.02 Hz), whereas the strain signals prevailed in the relatively high-frequency band. Thus, a novel method based on a digital filtering technique was proposed for temperature compensation in fiber Bragg grating sensor systems for monitoring the conditions in electrified pantograph–catenary systems. A Butterworth high-pass filter was designed to reject the temperature-related signal component with a stopband and to capture the real strain in the passband in frequency domain. To achieve this filtering, the cutoff frequencies and the filter order were calculated adaptively according to the frequency-domain characteristics of the measured temperature signal. With the designed filter, the temperature effect to the strain signals can be eliminated so that the strain can be estimated accurately. In comparison with the traditional temperature compensation technique, the proposed method is more effective in terms of estimating the real strain of the pantograph strip in practical applications. Compensated by the proposed method, the time-domain and frequency-domain analyses of the contact force denote the frequencies corresponding to the support span, and the dropper can be distinguished. Further, the first-order (4 Hz) and second-order (8.3 Hz) natural frequencies of the pantograph are visible in the measurements from catenary sections, which demonstrates the sufficiency and rationality of the proposed temperature compensation method for fiber Bragg grating sensor systems.

An External Fiber Grating Sensor used for Measurement of Interface Pressure between Cable and Accessory at High Temperature

Double Optical Fiber Temperature Compensation Method for Measurement of Interface Pressure Between Simulated Cable and Accessory at High Temperatures

A Novel High-Sensitivity Fiber Grating Sensor for Simultaneous Measurement of Temperature and Pressure

Application of Fiber Grating Sensor in Cable Temperature Measurement System

Simultaneous Measurement of Pressure and Temperature Using a Single Fiber Bragg Grating

Pressure sensor catheter based on Fiber Tip Fabry-Pérot-Interferometer and Fiber Bragg Grating for temperature compensation

A diaphragm-type fiber Bragg grating pressure sensor with temperature compensation

Thermal analysis of 22.9-kV crosslinked polyethylene cable joint based on partial discharge using fiber Bragg grating sensors

The Connection Technology Based on High Temperature Silica Fiber Optic Sensor

Comparison of Measurements with Finite-Element Analysis of Silicon-Diaphragm-Based Fiber-Optic Fabry–Perot Temperature Sensors

Non-Gel Encapsulation Process of a High Temperature Strain Fiber Bragg Grating Sensor and Its Sensing Properties

Temperature Compensation in Strain Measurement Using Erbium-doped Fluorescent Fiber Gratings

The Improvement of Temperature Sensitivity by Eliminating the Thermal Stress at the Interface of Fiber Bragg Gratings

Dynamic large strain measurement under high-temperature environment using a modified FBG sensor and plasma surface treatment

Cascaded Fabry-Perot cavity and fiber Bragg grating on sapphire fibers for high-temperature strain sensing

High-Consistency Optical Fiber Fabry–Perot Pressure Sensor Based on Silicon MEMS Technology for High Temperature Environment

Temperature Compensation of Optical Fiber Current Sensors With a Static Bias

A MEMS-Based High-Fineness Fiber-Optic Fabry–Perot Pressure Sensor for High-Temperature Application

Temperature-Compensated Interferometric High-Temperature Pressure Sensor Using a Pure Silica Microstructured Optical Fiber

Highly Integrated All-Fiber FP/FBG Sensor for Accurate Measurement of Strain under High Temperature

A temperature-compensated fiber Bragg grating sensor system based on digital filtering for monitoring the pantograph–catenary contact force