Double Optical Fiber Temperature Compensation Method for Measurement of Interface Pressure Between Simulated Cable and Accessory at High Temperatures

Xia Wang,Chao Wu,Yanding Wang,Zhuoyang Fan,Kai Wu

DOI: https://doi.org/10.1109/tdei.2023.3253808

IF: 2.509

2023-01-01

IEEE Transactions on Dielectrics and Electrical Insulation

Abstract:Reliable interface pressure between cables and accessories is closely associated with the safe operation of a power cable system. Using an external optical fiber Bragg grating (FBG) temperature-compensating curvature sensor, a new method for online measurement of the interface pressure between a cable and an accessory at high temperatures is proposed. On the basis of the sensing principle of an FBG, a mathematical pure bending model, and a model of a thick-walled cylinder, an FBG temperature-compensating curvature sensor is fabricated using the Dow Corning Sylgard-184 silicone rubber. The interface pressures of 10-kV cable accessories with different expansion rates at different temperatures are measured. The results of the measurements show that the temperature-compensated deviation of wavelength measurements made by the fiber grating curvature sensor ranges from −2.59% to 5.50%. The interface pressure between the cable and the accessory gradually increases with an increase in temperature from 30 °C to 60 °C. The results are consistent with the results of measurements made using a traditional piezoelectric sensor. This method is expected to evaluate the long-term reliability of the interface pressure of cable accessories in actual complex-temperature environments.