Abstract:Finite control set model predictive control (FCS-MPC) is a control strategy with fast response and a simple and flexible structure. However, when the control plant is complicated such as a multiphase electric machine, the application of FCS-MPC faces clear challenges. This article for the first time investigates the FCS-MPC for a nine-phase open-end winding (OW) permanent magnet synchronous machine, which is powered by nine H-bridge inverters with a common dc bus. First, in order to solve the challenge of substantial iterations in the conventional FCS-MPC, the number of control sets is simplified by reconfiguring the high level in switching states. Then, to eliminate the zero-sequence current caused by the common dc bus, the zero common-mode voltage (CMV) vector is selected. Subsequently, duty-ratio optimization is used to further reduce the available vectors. By the abovementioned measures, the number of iterations is reduced from 19 171 to 18. In order to suppress the harmonic current, the virtual voltage vectors (VVs) are designed. Each VV is synthesized by two zero CMV vectors, which can eliminate all the third and fifth harmonics in the output voltage. In addition, to achieve symmetrical pulsewidth modulation pulse sequences, a general pulse generation method for OW drive systems is proposed. Finally, the control performance of different control sets and harmonic weighting factors are evaluated and compared, and the experimental results have verified the effectiveness of the proposed methods.

Two New-type Control Strategies for Six-Phase Open Winding PMSM

Comparative Study of Flux-Weakening Control Methods for Pmsm Drive over Wide Speed Range

Study on Switching Strategy of PMSM and BLDCM

Control Strategy for Open Winding PMSM System Supplied by the Z-source and Voltage Source Integrated Converters

A PWM Strategy for Six-Phase Dual Stator Induction Motor Fed by Two Identical Voltage Source Inverters

A Sensorless Drive Strategy for Open-End Winding PMSM with Common DC Voltage Based on Lower Switching Frequency

A Unified Modulation Strategy Based on Current Prediction Control for Open-Winding PMSM with Four Bridge Arms

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

Single- and Two-Phase Open-Circuit Fault Tolerant Control for Dual Three-Phase PM Motor Without Phase Shifting

A Novel 3-D Space Vector Modulation Strategy for Open-End Winding PMSM

Study on six‐phase PMSM control strategy based on improved position sensorless detection technology

Control of Dual Three-Phase Permanent Magnet Synchronous Motor under Open Phase Fault Conditions

Bilateral Four-Segment-Mode Model Predictive Control for Open-Winding PMSM Drives

Dual Closed-Loop Control Strategy on Harmonic Plane for Multiphase Induction Motor with Harmonic Injection Based on Air-Gap Flux Orientation Control

Investigation of Decoupled PWM Strategy for a Three-Phase Open-End Winding Permanent Magnet Synchronous Motor Using a Five-Leg Inverter

Hybrid Vector Model Predictive Control for Open-winding PMSM Drives

An Improved 24-Sector SVPWM for Six-Phase Induction Motor

The Technology Study of Vector Control System for Permanent Magnet Synchronous Motor

Improved Direct Torque Control for Open-Winding PMSM System Considering Zero-Sequence Current Suppression with Low Switching Frequency

Virtual Voltage Vector Based Model Predictive Control for a Nine-Phase Open-End Winding PMSM With a Common DC Bus

Inverter Reconstruction Approach for Open-End Winding Five-Phase PMSM With Pattern-Based Vector Synthesis and Hybrid SVPWM Modulation