Abstract:The Controller Area Network (CAN) bus serves as a legacy protocol for in-vehicle data communication. Simplicity, robustness, and suitability for real-time systems are the salient features of the CAN bus protocol. However, it lacks the basic security features such as massage authentication, which makes it vulnerable to the spoofing attacks. In a CAN network, linking CAN packet to the sender node is a challenging task. This paper aims to address this issue by developing a framework to link each CAN packet to its source. Physical signal attributes of the received packet consisting of channel and node (or device) which contains specific unique artifacts are considered to achieve this goal. Material and design imperfections in the physical channel and digital device, which are the main contributing factors behind the device-channel specific unique artifacts, are leveraged to link the received electrical signal to the transmitter. Generally, the inimitable patterns of signals from each ECUs exist over the course of time that can manifest the stability of the proposed method. Uniqueness of the channel-device specific attributes are also investigated for time- and frequency-domain. Feature vector is made up of both time and frequency domain physical attributes and then employed to train a neural network-based classifier. Performance of the proposed fingerprinting method is evaluated by using a dataset collected from 16 different channels and four identical ECUs transmitting same message. Experimental results indicate that the proposed method achieves correct detection rates of 95.2% and 98.3% for channel and ECU classification, respectively.

Physical Layer Identification of Intermittent Open and Short Connection Faults in CAN Network

Design and Test of Hardware-in-the-loop Platform for Vehicle Chassis CAN System with Intermittent Open and Short Connection Faults

Tree-Based Intermittent Connection Fault Diagnosis for Controller Area Network

Intermittent Short Circuit Fault Location for CAN Based on Two-Port Network Modeling

Comparison Study of Error Patterns of Intermittent Open and Short Circuit Connection Faults in CAN Network

Intermittent Connection Fault Diagnosis for CAN Using Data Link Layer Information.

Data-driven Method in Detecting CAN Network Intermittent Connection Fault

Fault location identification for localized intermittent connection problems on CAN networks

Fault Location for the Intermittent Connection Problems on CAN Networks

Voltage-Based Physical Layer Fault Diagnosis for Controller Area Network

Diagnosis of Intermittent Connection Faults for CAN Networks With Complex Topology

Association Model-Based Intermittent Connection Fault Diagnosis for Controller Area Networks

Availability evaluation of controller area networks under the influence of intermittent connection faults

CAN Node Reliability Assessment Using Segmented Discrete Time Markov Chains

Data driven root cause analysis for intermittent connection faults in controller area networks

Message response time distribution analysis for Controller Area Network containing errors

Experimental Study On The Intermittent Connection Problems On Can Network

Controller Area Network Bus Physical Faults and Redundancy

Modeling for Early Fault Detection of Intermittent Connections on Controller Area Networks

Linking Received Packet to the Transmitter Through Physical-Fingerprinting of Controller Area Network

Application-Layer Anomaly Detection Leveraging Time-Series Physical Semantics in CAN-FD Vehicle Networks