Abstract:An intermittent connection is one of the major problems that affect the network reliability and communication quality. However, little attention has been paid to the detection, analysis and localization of the intermittent connections. Partially due to the limitations of the DeviceNet protocol, there is no effective online diagnostic tool available to identify the location of intermittent connection. On the basis of different DeviceNet fault scenarios induced by intermittent connections, a new graph-based diagnostic method is developed to analyze DeviceNet fault patterns, identify the corresponding fault scenarios, and infer the location of the intermittent connection problem by using passively captured network faults. A novel error source analysis tool, which integrates network data-link layer analysis and feature based network physical layer information, is developed to restore the snapshots of the network communication at each intermittent connection induced error. A graph based location identification method is developed to infer the location of the intermittent connections based on the restored error patterns. A 3-node laboratory test-bed, using master-slave polling communication method, is constructed to emulate the intermittent connection induced faults on the network drop cable by using digital switches, whose on/off states are controlled by a computer. During experiments, the network fault diagnosis is conducted by using information collected on trunk cable (backbone). Experimental study shows that the proposed method is effective to restore the snapshots of the network errors and locate the drop cable that experiences the intermittent connection problem.

Intermittent Connection Fault Diagnosis for CAN Using Data Link Layer Information.

Tree-Based Intermittent Connection Fault Diagnosis for Controller Area Network

Data-driven Method in Detecting CAN Network Intermittent Connection Fault

Diagnosis of Intermittent Connection Faults for CAN Networks With Complex Topology

Fault Location for the Intermittent Connection Problems on CAN Networks

Association Model-Based Intermittent Connection Fault Diagnosis for Controller Area Networks

Design and Test of Hardware-in-the-loop Platform for Vehicle Chassis CAN System with Intermittent Open and Short Connection Faults

Fault location identification for localized intermittent connection problems on CAN networks

Intermittent Short Circuit Fault Location for CAN Based on Two-Port Network Modeling

Physical Layer Identification of Intermittent Open and Short Connection Faults in CAN Network

Comparison Study of Error Patterns of Intermittent Open and Short Circuit Connection Faults in CAN Network

CAN Node Reliability Assessment Using Segmented Discrete Time Markov Chains

Availability evaluation of controller area networks under the influence of intermittent connection faults

Data driven root cause analysis for intermittent connection faults in controller area networks

Voltage-Based Physical Layer Fault Diagnosis for Controller Area Network

Message response time distribution analysis for Controller Area Network containing errors

Health Monitoring of Controller Area Network in Hybrid Excavator Based on the Message Response Time

Modeling for Early Fault Detection of Intermittent Connections on Controller Area Networks

Experimental Study On The Intermittent Connection Problems On Can Network

Diagnosis of Intermittent Connections for Device Net

Model-Based Detection and Monitoring of the Intermittent Connections for Can Networks