Abstract:Multiple degrees-of-freedom (multi-DOF) hydraulic manipulators are usually recognized as hard-to-control systems to achieve dynamic trajectory tracking because of strong nonlinearities, uncertainties, and complex couplings within the dynamics. In practice, when the end-effector of the multi-DOF hydraulic manipulator is tracking a given trajectory continuously, some joints may experience frequent stop-and-go or low-speed motions due to its kinematics. In such situations, dynamic friction becomes one of the main factors that affect the control performance. Inadequate compensation for the dynamic friction can result in undesired crawling or oscillatory behaviors of the manipulator. However, it is challenging to make effective compensation of the dynamic friction in control design due to its complicated and nonlinear properties. In this article, motion control of a multi-DOF hydraulic manipulator with extra consideration on the nonlinear friction for dynamic trajectory tracking is proposed. First, to make a more precise compensation of the nonlinear friction force, an improved LuGre model ensuring continuity and differentiability is developed, along with the method for obtaining nominal values of internal friction state based on desired trajectories. Then, a model-based adaptive robust motion controller is developed for the multi-DOF hydraulic manipulator. The nonlinearities and uncertainties of the high-order dynamics are well addressed in the closed-loop system, and the transient and asymptotic tracking performance can be guaranteed in theory. Finally, experimental validation was conducted, and the comparison with existing methods showed the improved tracking performance.

RISE-Based Adaptive Asymptotic Tracking Control of Space 3-DOF Manipulators with Hydraulic Actuators

Adaptive Robust Trajectory Tracking Control of a Parallel Manipulator Driven by Pneumatic Cylinders

Trajectory Tracking Control of a 6-DOF Hydraulic Parallel Robot Manipulator with Uncertain Load Disturbances

Trajectory Tracking Control of A Hydraulic Parallel Robot Manipulator with Lumped Disturbance Observer

Adaptive robust posture control of a parallel manipulator driven by pneumatic muscles

Motion Control of a Hydraulic Manipulator with Adaptive Nonlinear Model Compensation and Comparative Experiments

Advanced Motion Control of Hydraulic Manipulator with Precise Compensation of Dynamic Friction

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Linear-Extended-State-Observer-Based Adaptive RISE Control for the Wrist Joints of Manipulators with Electro-Hydraulic Servo Systems

RISE-based Adaptive Tracking Control for Euler–Lagrange Mechanical Systems with Matched Disturbances

Nonlinear Robust Adaptive Control of Hydraulic Manipulators with Asymptotic Tracking Performance

Neural Network Robust Control of a 3‐DOF Hydraulic Manipulator with Asymptotic Tracking

Position-Based Visual Servoing Control for Multi-Joint Hydraulic Manipulator

Neural Network-Based Adaptive Asymptotic Prescribed Performance Tracking Control of Hydraulic Manipulators

Design, analysis and experiment of robust adaptive repetitive angle tracking control for a one-DOF manipulator driven by pneumatic artificial muscles

Adaptive Optimal Tracking Control for Multi‐joint Manipulator on Space Robot

Neural Adaptive Dynamic Surface Asymptotic Tracking Control of Hydraulic Manipulators with Guaranteed Transient Performance.

Composite Adaptive Dynamic Surface Control for a Multi-DOF Hydraulic Manipulator With Disturbance Observer

Inverse Jacobian Adaptive Tracking Control of Robot Manipulators with Kinematic, Dynamic, and Actuator Uncertainties

Active disturbance rejection adaptive control of multi-degrees of freedom hydraulic manipulators

Modeling and trajectory tracking control of vehicle hydraulic rigid-flexible manipulator based on the expected joint angle compensation