Abstract:This paper presents the electrodeposition of a Dy layer onto the surface of sintered NdFeB magnets to serve as a diffusion source. Subsequently, the sintered NdFeB magnets were subjected to grain boundary diffusion treatment through electrochemical deposition at the solution temperature of 45 °C and the solution pH (hydrogenii) of 4.0. The results indicated that the coercivity of the Dy-diffused magnet increased from 1073 kA/m to 1418 kA/m compared to the original magnet after annealing at a primary diffusion heat treatment temperature of 900 °C for 6 h and subjected to the same secondary tempering heat treatment at 500 °C for 2 h, while the remanence remained relatively unaffected. SEM (Scanning Electron Microscopy) revealed that the Dy coating exhibited a compact and flat surface with a small grain size. Energy spectrum analysis confirmed a relatively uniform distribution of Dy elements in the electrodeposition coating, without any significant agglomeration. SEM-EDS (Scanning Electron Microscopy-Energy Dispersive Spectrometer) line scan demonstrated that the diffused Dy elements along the grain boundary phase primarily concentrated in the grain boundary phase itself and the epitaxial layer of the main grains. BSE (Backscattered Electron imaging) revealed the presence of a thin and continuous grain boundary phase structure between the main phases following grain boundary diffusion. XRD (X-ray diffraction) analysis demonstrated a general shift toward higher angles in the main peak of NdFeB after Dy diffusion. The remarkable increase in coercivity of the diffused Dy magnets can be attributed to the optimization of microstructure, grain boundary phase composition, and the formation of the (Dy,Nd) 2 Fe 14 B structure. The coercivity mechanism in diffusion Dy magnets was still governed by a nucleation reversal mechanism, as supported by the Kronmüller-Plot curve fitting. Tafel tests have revealed that Dy-diffused magnets have a much higher corrosion resistance with a more positive equilibrium potential, E corr , and a lower corrosion current density, I corr .

Development of Dy-free Sintered NdFeB Magnet Through Grain Boundary Engineering by Diffusion of PrCu Alloys

Development of Dy-Free Nd–Fe–B-Based Sintered Magnet Through Grain Boundary Engineering Using Pr–Cu Alloys

Effect of Different Grain Boundary Diffusion Alloys on Magnetic Properties of Dy-free Sintered NdFeB Magnet

Coercivity Enhancement in Dy-free Nd–Fe–B Sintered Magnets by Using Pr-Cu Alloy

Electrodeposition of Dy and its grain boundary diffusion behavior of sintered NdFeB magnets

Construction of High-Performance Multi-Main-phase Nd–Dy–Fe–B Sintered Magnets with Strengthened Chemical Heterogeneity

Dy-based Dual-Alloy Grain Boundary Diffusion for Sintered Nd-Fe-B Magnets with Improved Magnetic Performance and Corrosion Resistance

Coercivity Enhancement of Nd–Fe–B Sintered Magnets with Intergranular Adding (pr, Dy, Cu)−Hx Powders

The effect of PrCuGa grain boundary diffusion on the magnetic properties and microstructure of sintered Nd-La-Y-Fe-B magnet

Enhancing Coercivity and Mechanical Strength of Sintered Nd-Fe-B Magnets by Heavy Rare Earth-Free Grain Boundary Diffusion

Pr80Al20 Surface-Coated DyF3 Modified Sintered Nd-Fe-B Magnets for Large Coercivity Increment Via Grain Boundary Diffusion

Optimized Microstructure and Improved Magnetic Properties of Pr-Dy-Al-Ga Diffused Sintered Nd-Fe-B Magnets

Significantly Enhancing the Coercivity of NdFeB Magnets by Ternary Pr-Al-Cu Alloys Diffusion and Understanding the Elements Diffusion Behavior

Magnetic and mechanical properties of grain-refined Dy-free Nd-Fe-B sintered magnets

High-coercivity heavy-rare-earth-free NdFeB sintered magnets developed by doping Ce85Al15 and grain boundary diffusion with Pr70Cu15Al15

Effect of Grain Boundary Diffusion Pr and Cu on Properties of Sintered Nd-Fe-B Permanent Magnet

Grain boundary engineering towards high-figure-of-merit Nd-Ce-Fe-B sintered magnets: Synergetic effects of (Nd, Pr)Hx and Cu co-dopants

Diffusion Behavior of Heavy Rare-Earths for Grain Boundary Engineering of Sintered Nd-Fe-B-based Permanent Magnets Produced by the 2-Powder Method

Rapid coercivity increment of Nd–Fe–B sintered magnets by Dy69Ni31 grain boundary restructuring

Coercivity enhancement of NdFeB sintered magnets by low melting point Dy32.5Fe62Cu5.5 alloy modification

Nd-Fe-B Sintered Magnets with Low Rare Earth Content Fabricated Via Dy71.5Fe28.5 Grain Boundary Restructuring