Abstract:Phase sensitive optical time domain reflectometry (Φ-OTDR) has been widely used in many applications for its distributed sensing ability on weak disturbance all along the sensing fiber. However, traditional Φ-OTDR cannot make quantitative measurement on the external disturbance due to the randomly distributed position and reflectivity of scatters within the optical fiber. Recently, some methods have been proposed to realize quantitative measurement of dynamic strain. In these literatures, the fiber with or without FBGs in practice was easily damaged and with difficulty of maintenance. PZT is employed to generate strain event in the fiber. There is a large gap compared with the real detecting environment, which will not reveal the full performance of the sensing system. In this paper, a distributed optical fiber sensing (DOFS) system for dynamic strain measurement based on artificial reflector is proposed and demonstrated experimentally. The fiber under test (FUT) is composed by four 20-meter long single mode optical fiber patch cords (OFPCs), which are cascaded with ferrule contactor/physical contact (FC/PC) connectors via fiber flanges. The fiber facet of FC/PC connector forms an artificial reflector. When the interval between the two reflectors is changed, the phase of the interference signal will also be changed. A symmetric 3×3 coupler with table-look-up scheme is introduced to discriminate the phase change through interference intensity. In our experiment, the center 10m section of the second OFPC is attached to the bottom of an aluminum alloy plate. An ordinary loudspeaker box was located on the top of the aluminum alloy plate. The dynamic strain generated by the loudspeaker box is transmitted from the aluminum alloy plate to the OFPC. Experimental results show that the proposed method has a good frequency response characteristic up to 3.2 kHz and a linear intensity response of R2=0.9986 while the optical probe pulse width and repetition rate were 100ns and 10 kHz respectively. Meanwhile, triangle and cosine amplitude-modulated (AM) dynamic strain applied on the fiber are successfully discriminated. The artificial reflectors based on FC/PCs were easily assembled and maintained, and the method of vibration transmission closely resembled the real circumstance than PZT. Therefore, these advantages will extend the potential of this Φ-OTDR technology in structure health monitoring.

High Resolution Dynamic Strain Sensing Using Frequency-Scanning Φ-Otdr with Frequency Comb Pulse

Highly Sensitive and Fast Response Strain Sensor Based on Evanescently Coupled Micro/nanofibers

High-Resolution and High-Precision φ-OFDR Strain Sensing Scheme Based on Adaptive Phase Unwrapping and Wavelet Packet Denoising

Enhanced range of the dynamic strain measurement in phase-sensitive OTDR with tunable sensitivity

Ultrasensitive, high-dynamic-range and broadband strain sensing by time-of-flight detection with femtosecond-laser frequency combs

Dynamic strain sensing using Doppler-shift-immune phase-sensitive OFDR with ultra-weak reflection array and frequency-tracking

High-Spatial-Resolution Strain Sensor Based on Distance Compensation and Image Wavelet Denoising Method in OFDR

An Optoelectronic Oscillator‐based Strain Sensor with Extended Measurement Range

A High Performance Distributed Optical Fiber Sensor Based on Φ-OTDR for Dynamic Strain Measurement

High Spatial Resolution Distributed Fiber Strain Sensor Based on Phase-Ofdr

100Km Dynamic Strain Sensing Via CP-ΦOTDR

Performance Investigation of OFDR Sensing System with a Wide Strain Measurement Range

Distributed dynamic nano-strain sensing based on Φ-OTDR with coherent detection and IQ demodulation

Coherent OTDR with large dynamic range based on double-sideband linear frequency modulation pulse

Improved Φ-OTDR Sensing System for High-Precision Dynamic Strain Measurement Based on Ultra-Weak Fiber Bragg Grating Array

A Distributed Optical Fiber Sensing System for Dynamic Strain Measurement Based on Artificial Reflector

Long-distance OFDR with High Spatial Resolution based on Time Division Multiplexing

Single-shot Coherent Optical Time Domain Reflectometry with Pε/√hz Strain Sensitivity

High spatial-resolved φ-OTDR system based on differential pulse width sequence technique

Distributed Strain and Vibration Sensing System Based on Phase-Sensitive OTDR

Ultrahigh resolution optical fiber strain sensor using dual Pound-Drever-Hall feedback loops.