Abstract:Phase sensitive optical time domain reflectometry (Φ-OTDR) has been widely used in many applications for its distributed sensing ability on weak disturbance all along the sensing fiber. However, traditional Φ-OTDR cannot make quantitative measurement on the external disturbance due to the randomly distributed position and reflectivity of scatters within the optical fiber. Recently, some methods have been proposed to realize quantitative measurement of dynamic strain. In these literatures, the fiber with or without FBGs in practice was easily damaged and with difficulty of maintenance. PZT is employed to generate strain event in the fiber. There is a large gap compared with the real detecting environment, which will not reveal the full performance of the sensing system. In this paper, a distributed optical fiber sensing (DOFS) system for dynamic strain measurement based on artificial reflector is proposed and demonstrated experimentally. The fiber under test (FUT) is composed by four 20-meter long single mode optical fiber patch cords (OFPCs), which are cascaded with ferrule contactor/physical contact (FC/PC) connectors via fiber flanges. The fiber facet of FC/PC connector forms an artificial reflector. When the interval between the two reflectors is changed, the phase of the interference signal will also be changed. A symmetric 3×3 coupler with table-look-up scheme is introduced to discriminate the phase change through interference intensity. In our experiment, the center 10m section of the second OFPC is attached to the bottom of an aluminum alloy plate. An ordinary loudspeaker box was located on the top of the aluminum alloy plate. The dynamic strain generated by the loudspeaker box is transmitted from the aluminum alloy plate to the OFPC. Experimental results show that the proposed method has a good frequency response characteristic up to 3.2 kHz and a linear intensity response of R2=0.9986 while the optical probe pulse width and repetition rate were 100ns and 10 kHz respectively. Meanwhile, triangle and cosine amplitude-modulated (AM) dynamic strain applied on the fiber are successfully discriminated. The artificial reflectors based on FC/PCs were easily assembled and maintained, and the method of vibration transmission closely resembled the real circumstance than PZT. Therefore, these advantages will extend the potential of this Φ-OTDR technology in structure health monitoring.

Enhanced range of the dynamic strain measurement in phase-sensitive OTDR with tunable sensitivity

Enlarging Dynamic Strain Range in UWFBG Array-Based Φ-OTDR Assisted with Polarization Signal

Improved Φ-OTDR Sensing System for High-Precision Dynamic Strain Measurement Based on Ultra-Weak Fiber Bragg Grating Array

A High Performance Distributed Optical Fiber Sensor Based on Φ-OTDR for Dynamic Strain Measurement

A Distributed Optical Fiber Sensing System for Dynamic Strain Measurement Based on Artificial Reflector

Coherent OTDR with large dynamic range based on double-sideband linear frequency modulation pulse

An Optoelectronic Oscillator‐based Strain Sensor with Extended Measurement Range

Dynamic strain sensing using Doppler-shift-immune phase-sensitive OFDR with ultra-weak reflection array and frequency-tracking

Enhanced Φ - OTDR System for Quantitative Strain Measurement Based on Ultra-Weak Fiber Bragg Grating Array

Distributed Strain and Vibration Sensing System Based on Phase-Sensitive OTDR

Compensating for Influence of Laser-Frequency-drift in Phase-Sensitive OTDR with Twice Differential Method

High spatial-resolved φ-OTDR system based on differential pulse width sequence technique

Dynamic Measurement Based on the Linear Characteristic of Phase Change in $\phi$ -OTDR

Large Dynamic Strain Measurement in Φ-OTDR Based on Ultra-Weak FBG Array

Phase-sensitive Optical Time-Domain Reflectometry with Heterodyne Demodulation

Hybrid B-OTDR/Φ-OTDR for Multi-Parameter Measurement from a Single End of Fiber

Enhanced perturbation measurement range chirped pulse φ-OTDR for distributed static measurements using feedback frequency-shift compensation technology

The Performance Limit of Φ-OTDR Sensing System Enhanced with Ultra-Weak Fiber Bragg Grating Array

Improved Φ‐OTDR System with Narrow Pulses for Quantitative Strain Measurement Based on Ultra‐weak Fiber Bragg Grating Array

Performance enhancement for phase-sensitive OTDR based on multi-spatial resolution analysis

Amplitude-modulated pulses based phase-sensitive OTDR in distributed sensing