Abstract:Package lid and heat sink incorporated in PCB or chip package are often used for solving the heat dissipation problem, which is easy to form a resonant cavity with the metal ground plane of the package substrate, and consequently result in the noise current coupling to the package cover and heat sink through the capacitive effect, causing serious EMI problems, therefore, we propose a new resistive film-based super material absorber structure. In this paper, a unit of the proposed structure has resistive film patterns on the FR-4 substrate in front of the conductive plate, and the top layer uses Jerusalem cross, square and L-shaped resistive film to achieve bandwidth expansion. The unit size of the entire absorber is 0.15$\lambda_{L}\times 0.15\lambda_{L}(\lambda_{L}$ is the wavelength corresponding to the lowest cut-off frequency), while the thickness is only $0.07\lambda_{L}$. The simulation results show that the absorption rates are more than 90% in the frequency range from 22-40GHz. When the electromagnetic waves are perpendicular to the proposed resistive film absorber, it is insensitive to the polarization of TE and TM modes, and the absorption rates remain stable when the incident wave is wide-angle. Based on the equivalent medium theory, it is demonstrated that the structure achieves good impedance matching with free space in a wide frequency band. Meanwhile, the absorption mechanism of this structure is analyzed by the distribution of electric field and surface current, and the equivalent circuit model of resistive film absorber is established. The proposed resistive film absorber is characterized by miniaturization, ultra-wideband, high absorption rates, and insensitivity to polarization, providing a new idea for radiation suppression of highly integrated electronic devices.

Design and Validation of Single-Layer Evanescent Wave Absorber in Rectangular Waveguide

Single-Layer Evanescent Wave Absorbers in Rectangular Waveguides Based on Evanescent Mode Coupling and Attenuation

Single-Layer Evanescent Wave Absorber in Rectangular Waveguide Based on Evanescent Mode Coupling and Attenuation

Efficient Coupling of Evanescent Waves in Rectangular Waveguides Based on Ultrathin Planar Capacitive Metasurfaces

Ultrathin Multiband Microwave Absorber Based on Electric-Field-coupled-lc Resonators

Flexible Design and Realization of Wideband Microwave Absorber with Double-Layered Resistor Loaded FSS

Thin and Broadband Electromagnetic Absorber Design Using Resistors and Capacitors Loaded Frequency Selective Surface

Design of a Dual-Band Electromagnetic Absorber with Frequency Selective Surfaces

A Miniaturized Ultra-wideband Resistive Film Absorber for Radiation Suppression

The Prevention Of Multipactor Discharge In Rectangular Waveguide Loaded With Uniaxial Metamaterial

Design of Low Profile Broadband Electromagnetic Absorber

Ultralow Scattering and Broadband Metasurface Using Phase Adjustable FSS Elements Embedded With Lumped Resistors

Optimal design of electromagnetic absorbers using visualization method for wideband potential applications

Design of a Lattice Dielectric Cylinder Based on Multiwalled Carbon Nanotube-Epoxy Composite for Microwave Absorption in the X-band

Broadband and Omnidirectionally Matched Absorber for a Discrete Source

Ultrawideband Dispersion Control of a Metamaterial Surface for Perfectly-Matched-layer-like Absorption.

Wideband Electromagnetic Absorber Based On Array Of Parallel-Plate Waveguide

Ultra-Wideband Microwave Absorption by Design and Optimization of Metasurface Salisbury Screen.

Design of ultra wide-bandwidth double-layer electromagnetic wave absorbers with square-loop frequency selective surfaces

Design and Analysis of an Ultrawideband Multilayered Electromagnetic Absorber Using a Carbonyl Iron Magnetic Substrate and a Planar Periodic Conductive Structure for mmWave Applications

All-Metal Evanescent Wave Filtenna With Small Frequency Ratio Between Radiation Null and Transmission Pole for Narrow-Band Diplex Applications