Abstract:Package lid and heat sink incorporated in PCB or chip package are often used for solving the heat dissipation problem, which is easy to form a resonant cavity with the metal ground plane of the package substrate, and consequently result in the noise current coupling to the package cover and heat sink through the capacitive effect, causing serious EMI problems, therefore, we propose a new resistive film-based super material absorber structure. In this paper, a unit of the proposed structure has resistive film patterns on the FR-4 substrate in front of the conductive plate, and the top layer uses Jerusalem cross, square and L-shaped resistive film to achieve bandwidth expansion. The unit size of the entire absorber is 0.15$\lambda_{L}\times 0.15\lambda_{L}(\lambda_{L}$ is the wavelength corresponding to the lowest cut-off frequency), while the thickness is only $0.07\lambda_{L}$. The simulation results show that the absorption rates are more than 90% in the frequency range from 22-40GHz. When the electromagnetic waves are perpendicular to the proposed resistive film absorber, it is insensitive to the polarization of TE and TM modes, and the absorption rates remain stable when the incident wave is wide-angle. Based on the equivalent medium theory, it is demonstrated that the structure achieves good impedance matching with free space in a wide frequency band. Meanwhile, the absorption mechanism of this structure is analyzed by the distribution of electric field and surface current, and the equivalent circuit model of resistive film absorber is established. The proposed resistive film absorber is characterized by miniaturization, ultra-wideband, high absorption rates, and insensitivity to polarization, providing a new idea for radiation suppression of highly integrated electronic devices.

Single-Layer Evanescent Wave Absorbers in Rectangular Waveguides Based on Evanescent Mode Coupling and Attenuation

Single-Layer Evanescent Wave Absorber in Rectangular Waveguide Based on Evanescent Mode Coupling and Attenuation

Design and Validation of Single-Layer Evanescent Wave Absorber in Rectangular Waveguide

Ultrathin Multiband Microwave Absorber Based on Electric-Field-coupled-lc Resonators

Efficient Coupling of Evanescent Waves in Rectangular Waveguides Based on Ultrathin Planar Capacitive Metasurfaces

A Miniaturized Ultra-wideband Resistive Film Absorber for Radiation Suppression

Flexible Design and Realization of Wideband Microwave Absorber with Double-Layered Resistor Loaded FSS

Design of a Double-layer Miniaturized Metamaterial Absorber in 5G Millimeter-wave Band

Wideband Electromagnetic Absorber Based On Array Of Parallel-Plate Waveguide

A Rasorber-Like Waveguide Based on Thin Film

Design of Low Profile Broadband Electromagnetic Absorber

Design of a Lattice Dielectric Cylinder Based on Multiwalled Carbon Nanotube-Epoxy Composite for Microwave Absorption in the X-band

Ultrawideband Microwave Absorber Conformable on Nondevelopable Curved Surfaces Based on the Hauberk Structure

Design and Analysis of an Ultrawideband Multilayered Electromagnetic Absorber Using a Carbonyl Iron Magnetic Substrate and a Planar Periodic Conductive Structure for mmWave Applications

Ultrawide Bandwidth Electromagnetic Wave Absorbers Composed of Double-Layer Frequency Selective Surfaces with Different Patterns.

Design of a 10.8 to 34.6 GHz Ultra‐Wideband Transparent Metamaterial Absorber Using an Equivalent Circuit Model

A Lightweight Ultra‐Wideband Metasurface Microwave Absorber

Ultrawide Bandwidth Electromagnetic Wave Absorbers Using a High-capacitive Folded Spiral Frequency Selective Surface in a Multilayer Structure

A Tunable Ultra-Wideband Planar Metamaterial Absorber

All-Metal Evanescent Wave Filtenna With Small Frequency Ratio Between Radiation Null and Transmission Pole for Narrow-Band Diplex Applications

Microwave Metamaterial Absorber with Nλ0/2 Dielectric Thicknesses