Abstract:Based on the CM excitation voltage spectrum measurement and the electromagnetic‐simulated radiation transfer functions, an accurate prediction of the radiated emissions of a low‐power flyback adapter with complex cables is achieved. Radiated emissions (RE) testing has long been a challenge in the development of a switched mode power supply (SMPS) with respect to electromagnetic compatibility performance. Accurate far‐field RE prediction can effectively help SMPS designers reveal and understand the mechanisms of radiation generation, and reasonably suppress it. In this paper, a model for predicting the radiation from a single excitation source and a parasitic radiator for a flyback adapter are proposed after analysing the common mode voltage and current paths. Then, novel methods are proposed to predict the far‐field RE of the flyback adapter based on measurements and electromagnetic simulations. Using these methods, the 10‐m far‐field radiation of the flyback adapter under the curved cables layout is accurately predicted and verified by experiments. Then, the characteristics and influencing factors of the radiation are analysed, including the far‐field patterns, the load volume, and the sag degree of the output cable. Finally, a suppression design of the capacitor‐inductor (CL) notch filter is designed for the frequency points that are above the standard limits, and the RE are reduced to less than 30 dBμV/m from 30 to 300 MHz. The research methods proposed in this paper have good reference significance for radiation analysis and prediction of power electronic devices.

Prediction of Electromagnetic Radiation Emission from Telecommunication Power Supply

Far field radiated emissions prediction of a flyback adapter with curved cables utilizing electromagnetic simulation method

Far-field Prediction from Amplitude-Only Near-Field Measurements Using Equivalent Electric Currents

Radiated Emissions Prediction of an Electronic Packaging Based on Near-field Scanning

An Effective and Efficient Approach for Radiated Emission Prediction Based on Amplitude-Only Near-Field Measurements

Development of Artificial Neural Network for Field Prediction of Unknown EM Source

Near-Field Measurements Based Source Reconstruction Approach for Radiated Emissions Prediction

An Equivalent Radiation Source Based on Artificial Neural Network for EMI Prediction

Development of Simulation Prediction Techniques for Low Frequency Emissions

Wide-Band Near-Field Prediction of Unknown EM Source Based on Artificial Neural Network

Radiated Emission Prediction of a SMPS Based on Time Domain EMF-circuit Co-Simulation

A Source Reconstruction Method for Unknown EMI Sources Inside a Shielding Enclosure Based on Magnitude-Only Near-Field Scanning

An EM Imaging Method Based on Plane-Wave Spectrum and Transmission Line Model

Reactive Magnetic Near-Field to Far-Field Transformation Based on Plane Wave Spectrum at PCB Level

Prediction of Electromagnetic Leakage from Circuits Inside Package

An Equivalent Dipole Model Hybrid with Artificial Neural Network for Electromagnetic Interference Prediction

Broadband Radiation Source Reconstruction Based on Phaseless Magnetic Near-Field Scanning

Electromagnetic Radiation Mechanism Analysis and Field Strength Prediction of an Elementary Digital Inverter with Cables

An Effective Source Reconstruction Method of EMI Sources in Shielding Based on Phaseless Near-Field Scanning

Prediction of Radiated Emissions from Cables over a Metal Plane Using a SPICE Model

An iterative source reconstruction based method for radiated emissions prediction from PCBs