Abstract:This paper presents a continuous-time (CT) 0-4 dual-stage Multi-stAge Noise-sHaping (MASH) Delta-Sigma Modulator (DSM), exhibiting $+$ 5dBFS maximum stable amplitude (MSA). In the context of 0-4 MASH topology, the 4-bit CT DSM employed as the second stage only processes 4-bit quantization noise (QN) of the front-end. Though the input signal exceeds the full scale (FS), the second stage still stays stable as long as the signal leakage does not overload it. Such feature guarantees the improved stability over a wider signal input range. In addition, to address the well-known QN leakage issue of MASH topology, we propose to combine the feedforward topology with proportional-integral-based excess loop delay compensation. It ensures high robustness of the proposed 0-4 MASH DSM without requiring any calibration. Additionally, we present an analysis of the anti-aliasing filtering (AAF) for the 0-X MASH DSM. It is found that the overall AAF of the 0-X MASH DSM is contributed from the second stage. Sampled at 400MHz, the 65nm CMOS experimental prototype measures signal-to-noise and distortion ratio (SNDR)/spurious-free dynamic range (SFDR) of 76.7dB/87.3dB over a 10MHz bandwidth with 15.1mW power consumption. Moreover, with achieving $+$ 5dBFS MSA, the dynamic range (DR) is extended to be as high as 85dB, resulting in a state-of-the-art Scherier Figure of Merit (FoM) of 173.2dB based on DR.

20.5 A 76.6dB-SNDR 50MHz-BW 29.2mW Noise-Coupling-Assisted CT Sturdy MASH ΔΣ Modulator with 1.5b/4b Quantizers in 28nm CMOS

An 18-Bit 2-2 MASH Delta-Sigma Modulator for Isolated Amplifier

A 10Mhz-Bw 85Db-Dr CT 0-4 MASH Delta-Sigma Modulator Achieving Plus Dbfs MSA

A 70db SNDR 20Mhz-Bw VCO-Based CT Sturdy MASH Delta-Sigma Modulator with Robust Quantization Error Extraction

A 10.7-Μa 103-Db DR Hybrid Delta-Sigma Modulator for Sensing Applications

A 10Mhz-Bw 85Db-Dr CT 0-4 Mash Delta-Sigma Modulator Achieving +5dbfs MSA

A 15Mhz-Bw 82.7Db-Sndr 98.8Db-Sfdr Pipelined MASH 2–2 CT DSM in 65nm CMOS

A 0.18 μm Single-poly CMOS ∑-△ Modulator for Digital Audio Applications

A Multi-Rate Hybrid DT/CT Mash ΔΣ Modulator with High Tolerance to Noise Leakage

A 470μw 20Khz-Bw 107.3Db-Sndr Nested CT DSM Employing Negative-R-Based Cross-RC Filter and Weighted Multi-Threshold MSB-Pass Quantizer

Wideband Continuous-Time MASH Delta-Sigma Modulators: A Tutorial Review

Design Of A 5gs/S 200 Mhz Bw 74.8 Db Sndr Continuous-Time Sigma Delta Modulator In 28nm Cmos

A 14b continuous-time delta-sigma modulator with 2MHz signal bandwidth

A Robust Hybrid CT/DT 0-2 MASH DSM with Passive Noise-Shaping SAR ADC.

A 0.37mm 2 250kHz-BW 95dB-SNDR CTDSM with Low-Cost 2 nd -order Vector-Quantizer DEM.

A 0.37mm<sup>2</sup> 250kHz-BW 95dB-SNDR CTDSM with Low-Cost 2<sup>nd</sup>-order Vector-Quantizer DEM

A 9-Mw Continuous-Time Hybrid Active-Passive Sigma Delta Modulator With 84-Db Dynamic Range

Continuous-time Delta-Sigma Modulators: Single-loop versus MASH

A Self-coupled DT MASH ΔΣ Modulator with High Tolerance to Noise Leakage.

A 1V 350μW 92dB SNDR 24 kHz ΔΣ modulator in 0.18μm CMOS

A 1-V 110-Μw 105.5-Db CT-ΣΔ Modulator with 20 Khz Signal Bandwidth for Hearing Aids Application