Abstract:To meet the demands of highly integrated and miniaturized radio frequency front-end (RFFE) modules, multi-passband filters which support multi-channel compounding come to the foreground. In this work, we proposed a new design of a dual-passband surface acoustic wave (SAW) filter based on a 32°YX-LiNbO3 (LN)/SiO2/SiC multilayered structure. The filter is of a standalone ladder topology and comprises dual-mode resonators, in which the shear horizontal (SH) mode and high-order SH mode are simultaneously excited through electrode thickness modulation. The impact of electrode thickness on the performance of the dual-mode resonator was systematically investigated by the finite element method (FEM), and resonators were prepared and verified the simulation results. The electromechanical coupling coefficients (K2) of the SH modes are 15.1% and 17.0%, while the maximum Bode-Q (Qmax) values are 150 and 247, respectively, for the fabricated resonators with wavelengths of 1 μm and 1.1 μm. In terms of the high-order SH modes in these resonators, the K2 values are 9.8% and 8.4%, and Qmax values are 190 and 262, respectively. The fabricated dual-band filter shows the center frequencies (fc) of 3065 MHz and 4808 MHz as two bands, with 3-dB fractional bandwidths (FBW) of 5.1% and 5.9%, respectively. Such a dual-band SAW filter based on a conventional ladder topology is meaningful in terms of its compact layout and diminished area occupancy. This work provides a promising avenue to constitute a high-performance dual-passband SAW filter for sub-6 GHz RF application.

SAW Filter with High Out-of-Band Rejection Using Improved Grounding Method

Compact Substrate Integrated Waveguide (SIW) Filter with Defected Ground Structure

A Highly Selective and Compact SAW Filter with Cascaded DMSs

A Synthetic Wideband SAW Filter Using Parallel DMS

Hybrid Integration of BAW Resonators with an On-Chip Inductor to Improve the Stopband Rejection of the N78 Band Filter

Design of Miniaturized Narrow-Band POI-SAW Filter Using Mixed Ladder-DMS Topology

A Compact Half-Mode Substrate Integrated Waveguide Bandpass Filter with Wide Out-of-Band Rejection

Synthesis and Design of a Highly Selective Band-5 SAW Filter Using Cascaded DMS with Nonuniform Polarities

Dual-Passband SAW Filter Based on a 32°Yx-Ln/sio2/sic Multilayered Substrate.

Miniaturized broadband high out-of-band rejection bandpass filter based on spoof surface plasmon polaritons with defected ground structure

Design Consideration of Saw/Baw Band Reject Filters Embedded in Impedance Converter

Design of 2-Track DMS SAW Filter with Low Loss, High Selectivity and Compact Size for Band-29 Applications

SAW Duplexer with High Isolation Based on Rejection Resonator and Cross Coupled Capacitor

High-Q Bandpass-to-Bandstop Reconfigurable Filter Based on SAW Resonators

High Selectivity Filtering Power Divider Based on SAW Resonator

Band 40/41 Surface Acoustic Wave Filters on 42°YX-Lithium Tantalate Substrate with Suppression of Transverse Leakage

Dual High-Selectivity Band-Notched Ultra-Wideband Filter with Improved Out-of-Band Rejection

Reconfigurable Dual-Band Bandpass-to-Bandstop Filter Using SAW Resonators and Lumped Elements

Over GHz bandwidth SAW filter based on 32<SUP></SUP> Y-X LN/SiO<sub>2</sub>/poly-Si/Si heterostructure with multilayer electrode modulation

Compact Bandpass Filter with Wide Stopband and Low Radiation Loss Using Substrate Integrated Defected Ground Structure

Over GHz bandwidth SAW filter based on 32° Y-X LN/SiO2/poly-Si/Si heterostructure with multilayer electrode modulation