Abstract:To protect power systems from severe short circuit faults, the zero-current switching (ZCS) technique is widely accepted due to its fast interruption speed. However, the traditional ZCS technique is more complicated in bidirectional switching, which limits its wide application, especially in AC power systems. Therefore, a novel auto-oriented bidirectional ZCS hybrid circuit breaker is proposed to simplify the overall topology of the circuit breaker. The design of the ZCS hybrid circuit breaker is based on the idea of diverting the pulse current toward the reverse direction of the fault current by the arcing voltage itself. The proposed scheme can interrupt bidirectional faults with just one ZCS circuit, without detecting fault current direction. Firstly in the paper, the topology and operating principles of the proposed bidirectional ZCS hybrid circuit breaker are introduced. Moreover, the key parameters are optimized to make the hybrid circuit breaker capable of bidirectional interruption automatically. Furthermore, dielectric recovery characteristics of the vacuum interrupter under special conditions are also measured to determine the design parameters. The proposed topology of the bidirectional ZCS hybrid circuit breaker is validated using a 450VAC/630A prototype. Short circuit breaking tests of the prototype are conducted without detecting fault current direction in advance. Experimental results show that the breaking time of the prototype is less than 1 ms in clearing either direction of fault current with a prospective value of 20 kA and $\text{d}i/\text{d}t$ of 8 A/ $\mu \text{s}$ . The feasibility of the proposed scheme is verified with these test results.

One Test Method for DCCB Based on Vacuum Interrupter

A Double-Break Current Injection Vacuum DCCB: Principle and Analysis

Highlighted Technical Issues Concerning Test Technologies of HV DCCBs

A Novel Direct Current Circuit Breaker with a Gradually Increasing Counter-Current

Transient Current Interruption Characteristics of a Novel Mechanical DC Circuit Breaker

Current Interruption Tests of HVDC Circuit‐breakers: Requirements, Methods and a Testing Case

Investigation on the DC CB Performance During a Current Interruption Failure at First Current Zero

Research On Current Commutation Measures For Hybrid Dc Circuit Breakers

Analysis of Different Test Techniques of DC Circuit Breaker

A Fast LVDC Vacuum Hybrid Circuit Breaker: Dielectric Recovery and Design Consideration

Two Basic Ways to Realise DC Circuit Breakers

Hybrid Mechanical-Static Dc Circuit Breaker And Dc Breaking

Design and Implementation of an Auto-Oriented Bidirectional ZCS Hybrid Circuit Breaker

A mechanical DCCB with re-closure capability and its performance in MMC based DC grid

Investigation of an Active Current Injection DC Circuit Breaker Based on a Magnetic Induction Current Commutation Module

A New Measurement Method of Contact Conditions in a Vacuum Circuit Breaker With the Field Emission Current During the Closing Operation

Technical Assessment of Hybrid DCCB with Improved Current Commutation Drive Circuit

Research on Contact Structure in Vacuum Interrupter for DC Breaking Capability

Investigation Of A Novel Igct Module For Dc Circuit Breaker

Synthetic Test Circuit with Two‐level Voltage Source for HVDC Circuit Breakers

Comprehensive Modeling, Optimization and Experiment of 10 kV/15 kA Forced Resonant DC Circuit Breaker