Abstract:The precise localization of unmanned ground vehicles (UGVs) in industrial parks without prior GPS measurements presents a significant challenge. Simultaneous localization and mapping (SLAM) techniques can address this challenge by capturing environmental features, using sensors for real-time UGV localization. In order to increase the real-time localization accuracy and efficiency of UGVs, and to improve the robustness of UGVs' odometry within industrial parks-thereby addressing issues related to UGVs' motion control discontinuity and odometry drift-this paper proposes a tightly coupled LiDAR-IMU odometry method based on FAST-LIO2, integrating ground constraints and a novel feature extraction method. Additionally, a novel maintenance method of prior maps is proposed. The front-end module acquires the prior pose of the UGV by combining the detection and correction of relocation with point cloud registration. Then, the proposed maintenance method of prior maps is used to hierarchically and partitionally segregate and perform the real-time maintenance of the prior maps. At the back-end, real-time localization is achieved by the proposed tightly coupled LiDAR-IMU odometry that incorporates ground constraints. Furthermore, a feature extraction method based on the bidirectional-projection plane slope difference filter is proposed, enabling efficient and accurate point cloud feature extraction for edge, planar and ground points. Finally, the proposed method is evaluated, using self-collected datasets from industrial parks and the KITTI dataset. Our experimental results demonstrate that, compared to FAST-LIO2 and FAST-LIO2 with the curvature feature extraction method, the proposed method improved the odometry accuracy by 30.19% and 48.24% on the KITTI dataset. The efficiency of odometry was improved by 56.72% and 40.06%. When leveraging prior maps, the UGV achieved centimeter-level localization accuracy. The localization accuracy of the proposed method was improved by 46.367% compared to FAST-LIO2 on self-collected datasets, and the located efficiency was improved by 32.33%. The z-axis-located accuracy of the proposed method reached millimeter-level accuracy. The proposed prior map maintenance method reduced RAM usage by 64% compared to traditional methods.

A Real-Time and Robust LiDAR SLAM System Based on IESKF for UGVs

A Simultaneous Localization and Mapping System Using the Iterative Error State Kalman Filter Judgment Algorithm for Global Navigation Satellite System

A Robust and Fast GNSS-Inertial-LiDAR Odometry With INS-Centric Multiple Modalities by IESKF

A decentralized framework for simultaneous calibration, localization and mapping with multiple LiDARs

Continuous and Precise Positioning in Urban Environments by Tightly Coupled Integration of GNSS, INS and Vision

LiDAR Scan Matching Aided Inertial Navigation System in GNSS-Denied Environments

A Fast and Stable GNSS-LiDAR-Inertial State Estimator from Coarse to Fine by Iterated Error-State Kalman Filter

Testing and Evaluation of LiDAR SLAM Algorithms Based on the Combination of Virtuality and Reality Method

Kinematic and Dynamic Vehicle Model-Assisted Global Positioning Method for Autonomous Vehicles with Low-Cost GPS/Camera/In-Vehicle Sensors

An Enhanced-LiDAR/UWB/INS Integrated Positioning Methodology for Unmanned Ground Vehicle in Sparse Environments

Robust Visual-Lidar Simultaneous Localization and Mapping System for UAV

Robust Vision-Aided Inertial Navigation System for Protection Against Ego-Motion Uncertainty of Unmanned Ground Vehicle

An ESKF Based SLAM Approach with Millimeter Wave Radar and IMU

LiDAR-Based Sensor Fusion SLAM and Localization for Autonomous Driving Vehicles in Complex Scenarios

A High-Precision SLAM System Based on Lidar, IMU and Wheel Encoders

RESEARCH ON SENSOR FUSION-BASED CALIBRATION AND REAL-TIME POINT CLOUD MAPPING METHODS FOR LASER LIDAR AND IMU

Robust Localization of Industrial Park UGV and Prior Map Maintenance

Robust Lidar-Based Localization Scheme for Unmanned Ground Vehicle via Multisensor Fusion

Design of visual inertial state estimator for autonomous systems via multi-sensor fusion approach

A Tightly-Coupled and Keyframe-Based Visual-Inertial-Lidar Odometry System for UGVs With Adaptive Sensor Reliability Evaluation