Abstract:We present the prototype module of our extendible and robust multichannel SQUID magnetometer system. A multi-module arrangement can be implemented by using up to 7 modules. It is intended for high-precision measurements of biomagnetism and spin precession. Further demanding applications are magnetorelaxometry and ultra-low-field nuclear magnetic resonance (ULF NMR), where pulsed fields of up to 100 mT are typically applied. The system is operated inside the Berlin Magnetically Shielded Room and equipped with 18 magnetometers consisting of niobium (Nb) wire-wound pick-up coils. A total of 16 small pick-up coils with 17.1 mm diameter form a regular grid with individual channels arranged to ensure system sensitivity covers all three orthogonal spatial directions. Two large hexagonal pick-up coils with an equivalent diameter of 74.5 mm sensitive in z-direction surround the grid at two different heights and are suitable for the detection of deep sources. Each coil is connected to the input of a thin-film Nb SQUID current sensor via a detachable superconducting contact. The SQUIDs are equipped with integrated input current limiters. Feedback into the pick-up coils minimizes crosstalk between channels. The current sensor chip package includes a superconducting shield of Nb. The field distortion of the prototype and a multi-module arrangement was analysed by numerical simulation. The measured noise of the small magnetometers was between 0.6 and 1.5 fT/Hz$^{1/2}$, and well below 1 fT/Hz$^{1/2}$ for the large ones. Using a software gradiometer, we achieved a minimum noise level of 0.54 fT/Hz$^{1/2}$. We performed ULF NMR experiments, verifying the system's robustness against pulsed fields, and magnetoencephalographgy (MEG) on somatosensory evoked neuronal activity. The low noise performance of our 18-channel prototype enabled the detection of high-frequency components at around 1 kHz by MEG.

Simulations and Experiments on Crosstalk of Multichannel SQUID Sensor Array for Magnetoneurography

Crosstalk Analysis and Current Measurement Correction in Circular 3D Magnetic Sensors Arrays

A Study on Magnetic Flux Concentrator to Enhance Sensitivity of SQUID in Magnetoenterogram

Simulation and Experimentation of Flux Jump in SQUID Magnetometer under the Geomagnetic Field

Multi-Channel Magnetocardiogardiography System Based on Low-Tc SQUIDs in an Unshielded Environment

Optimized Design and Calibration of the Triaxis Induction Magnetometer with Crosstalk and Nonorthogonality Compensation.

Numerical Analysis of Eddy Current Induced by Z-Gradient Coil in a Superconducting MRI Magnet

A Combined Magnetoelectric Sensor Array and MRI-Based Human Head Model for Biomagnetic FEM Simulation and Sensor Crosstalk Analysis

On the coupling of magnetic moments to superconducting quantum interference devices

An Efficient Calibration Method for SQUID Measurement System Using Three Orthogonal Helmholtz Coils

SQUIDs in biomagnetism: a roadmap towards improved healthcare

Efficient multiscale investigation of mechanical behavior in Nb3Sn superconducting accelerator magnet based on self-consistent clustering analysis

Holistic numerical simulation of a quenching process on a real-size multifilamentary superconducting coil

A modular, extendible and field-tolerant multichannel vector magnetometer based on current sensor SQUIDs

A General Model for Simulating the Quench Behavior of Canted-Cosine-theta (CCT) Quadrupole Magnets

Superconducting receiver arrays for magnetic resonance imaging

Low- T c direct current superconducting quantum interference device magnetometer-based 36-channel magnetocardiography system in a magnetically shielded room

A Study On The Multi-Channel Tms Device

Multi-Channel Magnetocardiogardiography System Calibration

An Economical Magnetocardiogram System Based on High- T C SQUIDs

Magnetic Flux Concentration Technology Based on Soft Magnets and Superconductors