Abstract:Radio frequency (RF)-induced heating associated with medical implants is a critical concern when performing a magnetic resonance imaging (MRI) scan. The purpose of this study is to construct a “digital twin” of RF coil integrated in an MRI scanner by <inline-formula> <tex-math notation="LaTeX">$B_{1}^{+}$ </tex-math></inline-formula> map matching, reproducing the physical electromagnetic (EM) field, allowing it to be a qualified test environment for heating evaluations. <inline-formula> <tex-math notation="LaTeX">$B_{1}^{+}$ </tex-math></inline-formula> map inside an American Society for Testing Material (ASTM) phantom with various positions was used to characterize the physical EM field. A loaded tuned two-port birdcage body coil model was established to generate the numerical EM field and optimized to minimize the difference between the measured and simulated fields, which was quantified by “mean symmetric mean absolute percentage error” (mSMAPE). The amplitude of the simulated field was normalized to MR sequence labeling. Finally, the average specific absorption rate (SAR) inside the ASTM phantom was measured in a calorimetry experiment and compared to simulation one heated by the pre-established coil. A heating experiment was performed on an insulated cable to further validate the established test environment. The impact of excitation parameters and the port location was investigated. mSMAPE of the optimized field was less than 10%. The difference between the simulated and measured average SAR was 8.5%. <inline-formula> <tex-math notation="LaTeX">$R^{2}$ </tex-math></inline-formula> for the linear regression of the temperature rise and predicted power deposition using the optimized field was 0.993. The digital twin was successfully constructed and verified a sufficiently accurate description of the physical field. The established construction method of the digital twin provides a handy choice for building RF test environment and may create more possibilities for the development of this area.

Breast Intervention Device for Low-Field MRI with a Customized Unilateral Coil

Breast imaging with an ultra-low field MRI scanner: a pilot study

A Detachable Interventional Magnetic Resonance Imaging Coil for Cerebral Surgery

Design of an Interventional Magnetic Resonance Imaging Coil for Cerebral Surgery

Development of a human-size magnetic particle imaging device for sentinel lymph node biopsy of breast cancer

Wireless, Customizable Coaxially-shielded Coils for Magnetic Resonance Imaging

MRI Robots for Needle-Based Interventions: Systems and Technology

Prototype Description and Ex Vivo Evaluation of a System for Combined Endorectal Magnetic Resonance Imaging and In-Bore Biopsy of the Prostate

Multimodal surface coils for low-field MR imaging

Constructing a Digital Twin of the Birdcage Coil in an MR Scanner by Map Matching: For Radio Frequency Heating Evaluation of Implantable Medical Devices

Near-Field Coupling Coil System: A Novel Radiofrequency Coil Solution for MRI

Volumetric wireless coils for breast MRI: A comparative analysis of metamaterial-inspired coil, Helmholtz coil, ceramic coil, and solenoid

Coupled stack-up volume RF coils for low-field open MR imaging

Initial experience with a next-generation low-field MRI scanner: Potential for breast imaging?

Design of miniatured MRI coils for MRI‐guided tumor diagnosis and hyperthermia therapy

A Detachable and Rotatable 14-Channel Coil Array for Human Brain Intraoperative/Interventional MRI at 3 T

Design and Control of a Novel Magnetic Resonance Imaging-Compatible Breast Intervention Robot

A Miniature Flexible Coil for High-SNR MRI of the Pituitary Gland

Wireless, customizable coaxially shielded coils for magnetic resonance imaging

An Asymmetric Birdcage Coil Design for <sup>19</sup>F Lung MR Imaging at 1.5 T

Design and Analysis of A Novel MRI-compatible Breast Biopsy RobotBehaviors