Abstract:Hexagonal boron nitride (h-BN) coatings with different thickness were prepared on quartz fibers to improve mechanical properties of quartz fiber reinforced Si-O-C-N composite. Scanning electron microscopy (SEM), push-out test and single edge notched beam (SENB) in three point bending test were employed to study morphology, interface shear strength and fracture toughness of the composite. The results showed that h-BN coatings changed the crack growth direction and weaken the interface shear strength efficiently. When the h-BN coating was 308.2 nm, the interface shear strength was about 5.2 MPa, which was about one-quarter of that of the sample without h-BN coatings. After the heating process for obtaining composite, the h-BN nanometer-sized grains would grow up to micron-sized hexagonal grains. Different thickness h-BN coatings had different structure. When the coatings were relatively thin, the hexagonal grains were single layer structure, and when the coatings were thicker, the hexagonal grains were multiple layer structure. This multiple layer interface phase would consume more power of cracks, thus interface shear strength of the composite decreased steadily with the increasing of h-BN coatings thickness. When the coating thickness was 238.8 nm, K-IC reaches the peak value 3.8 MPa m(1/2), which was more than two times of that of composites without h-BN coatings. (C) 2013 Elsevier B.V. All rights reserved.

Effect on BN Interphase Thickness Upon SiCnws@BN/HfC Coating Performance under Impact and Ablation Environment

Effect of SiCnws@BN core shell upon impact-ablation performance of HfC coating on C/C composites

Effect of PyC-SiC double-layer interface on ablation behaviour of impacted CVD-SiCnws/HfC coating

Effects of SiC Coating on Ablation Resistance of Carbon Fibre Reinforced BN–Si3N4 Matrix Composite

Influence of Dip-Coated Boron Nitride Interphase on Mechanical and Dielectric Properties of SiCf/SiC Composites

Dip-Coating of Boron Nitride Interphase and Its Effects on Mechanical Properties of Sicf/Sic Composites

Deposition of BN interphase coatings from B-Trichloroborazine and its effects on the mechanical properties of SiC/SiC composites

Effect of BNNTs/matrix interface tailoring on toughness and fracture morphology of hierarchical SiCf/SiC composites

Effects of Dip-Coated Bn Interphase on Mechanical Properties of Sicf/Sic Composites Prepared by Cvi Process

Effect of BN interfacial layer on the mechanical behavior of SiC fiber reinforced SiC ceramic matrix composites

Microstructure and Mechanical Properties of Si3N4f/BN Composites with BN Interphase Prepared by Chemical Vapor Deposition of Borazine

Effects of BN Coating on the Oxidation and Crystallization Behavior of Si3N4 Fibers

Influence of HfC Nanowires on the Growth Behavior, Microstructure and Ablation Resistance of CVD-HfC Coating

The Interface Interaction Within Multi-Phase Oxides on the Ablation Behavior of the (Hf0.25zr0.25ti0.5)c-Coated C/C Composites

Effect of BN/SiC Interfacial Coatings on the Tensile Properties of SiC/SiC Minicomposites Fabricated by PIP

Effect of different thickness h-BN coatings on interface shear strength of quartz fiber reinforced SiOCN composite

Ablation Resistance of Hfc Coating Reinforced by Hfc Nanowires in Cyclic Ablation Environment

Effects of HfC Nanowire Amount on the Microstructure and Ablation Resistance of CVD-HfC Coating

Ablation Properties of HfB2 Coatings Prepared by Supersonic Atmospheric Plasma Spraying for SiC-coated Carbon/carbon Composites

Preparation and Ablation Behavior of HfC-SiC Co-Deposited Coatings with Different Proportions

Ablation Resistance of HfB2-SiC Coating Prepared by In-Situ Reaction Method for SiC Coated C/C Composites