Abstract:To further improve the thermal shock resistance and ablation resistance of SiBCN system ceramics targeted much harsh environment, both ultra-high temperature ceramic phases and carbon fibers are expected to be incorporated simultaneously as the reinforcements. However, tough problems like difficulty in densification as well as degradation of C fibers (Cf) due to interfacial reaction usually cannot be avoided. Thus, in this study, Zr as well as chopped Cf with BN coating were introduced into SiBCN ceramics by mechanical alloying and after hot-pressing sintering to prepare C/SiBCNZr composites. The structure and phase component development have been characterized in detail by XRD, SEM, TEM and XPS etc., and mechanical properties, fracture behavior and toughening mechanisms were also investigated. Zr-B and Zr-O bonds are detected besides Si-C, N-B and N-B-C bonds when pre-alloyed ZrB2 amorphous powder was incorporated into SiBCN system by further mechanical-alloying treatment. After hot-pressing, the ultra-high temperature phases of ZrB2 and ZrN were formed as expected besides the original matrix phases of BN(C) and SiC. Excellent mechanical properties can be obtained for SiBCNZr ceramic. The BN coating on carbon fibers successfully avoids the severe fiber degradation and makes it possible for moderating strong interface bonding, which ensuring the debonding, crack deflection, fiber pulling-out and bridging during the fracture. As a result, the C/SiBCNZr composites retain good mechanical properties and fractures in a pseudoplastic fracture manner, showing better potential applications in harsh environments. Optimization of the BN coating on Cf and Zr incorporation by pre-mechanical alloying can be a good route to achieve Cf/SiBCNZr composites with a better balance between thermal shock resistance, ablation resistance and mechanical properties.

Effects of BN Coating on the Oxidation and Crystallization Behavior of Si3N4 Fibers

Effects of Boron Content on the Microwave‐transparent Property and High‐temperature Stability of Continuous SiBN Fibers

Influence of Dip-Coated Boron Nitride Interphase on Mechanical and Dielectric Properties of SiCf/SiC Composites

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Characterization and Microstructural Evolution of Continuous BN Ceramic Fibers Containing Amorphous Silicon Nitride

Dip-Coating of Boron Nitride Interphase and Its Effects on Mechanical Properties of Sicf/Sic Composites

Preparation of high performance Si-B-N ceramic fibers by polymer derived method

Crystallization Behaviors of Carbon Fiber Reinforced BN‐Si3N4 Matrix Composite

Microstructure and Mechanical Properties of Si3N4f/BN Composites with BN Interphase Prepared by Chemical Vapor Deposition of Borazine

Deposition of BN interphase coatings from B-Trichloroborazine and its effects on the mechanical properties of SiC/SiC composites

Effect of BN interfacial layer on the mechanical behavior of SiC fiber reinforced SiC ceramic matrix composites

Ablation Behavior of Boron Nitride Based Ceramic Composites Reinforced by Continuous Silicon Oxynitride Fiber

Study on the fiber/matrix interface modification of Si3N4 f/SiO2 composites with polymer derived double-layer coatings

High-temperature Oxidation Behavior of SiBN Fibers in Air

The Improvement of Wave-Absorbing Ability of Silicon Carbide Fibers by Depositing Boron Nitride Coating

Thermal Shock Behavior of Si3N4/BN Fibrous Monolithic Ceramics

Effect of BN content on microstructures, mechanical and dielectric properties of porous BN/Si3N4 composite ceramics prepared by gel casting

Synthesis of Coatings on SiC Fibers and Their Effects on Microstructure and Mechanical Properties of SiCf/SiBCN Composites

Effects of Zr and chopped C fiber on microstructure and mechanical properties of SiBCN ceramics

Incorporation of BN-coated carbon fibers into ZrB2/SiBCN ceramic composites and their ablation behavior

Effects of Dip-Coated Bn Interphase on Mechanical Properties of Sicf/Sic Composites Prepared by Cvi Process