Abstract:Understanding the heat transfer of winglet tips is crucial for their applications in high pressure turbines. The current paper investigates the heat transfer performance of three different winglet-cavity tips in a transonic turbine cascade at a tip gap of 2.1% chord. A cavity tip was studied as the baseline case. The cascade operates at engine representative conditions of an exit Mach number of 1.2 and an exit Reynolds number of 1.7×106. Transient infrared thermography technique was used to obtain the tip distributions of heat transfer coefficient for different tips in the experiment. The CFD results were validated with the measured tip heat transfer coefficients, and then used to explain the flow physics related to heat transfer. It is found that on the pressure side winglet, the flow reattaches on the top winglet surface and results in high heat transfer coefficient. On the suction side winglet, the heat transfer coefficient is low near the blade leading edge, but is higher from the mid-chord to the trailing edge. The suction side winglet pushes the tip leakage vortex further away from the blade suction surface and reduces the heat transfer coefficient from 85% to 96% span on the blade suction surface. However, the heat transfer coefficient is higher for the winglet tips from 96% span to the tip. This is because the tip leakage vortex attaches on the side surface of the suction side winglet and results in quite high heat transfer coefficient on the front protrusive part of the winglet. The effects of relative endwall motion between the blade tip and the casing were investigated by CFD methods. The endwall motion has a significant effect on the flow physics within the tip gap and near tip region in the blade passage, thus affects the heat transfer coefficient distributions. With relative endwall motion, a scraping vortex forms inside the tip gap and near the casing, and the cavity vortex gets closer to the pressure side squealer/winglet. The tip leakage vortex in the blade passage becomes closer to the blade suction surface, resulting in an increase of the heat transfer coefficient.

Aerothermal Effects of Squealer Openings on a Cavity Tip in a Turbine Cascade

Squealer Geometry Effects on Aerothermal Performance of Tip-Leakage Flow of Cavity Tips

Aerothermal performance of cavity tip with flow structure effects in a transonic high-pressure turbine blade

Effects of Endwall Motion on Thermal Performance of Cavity Tips with Different Squealer Width and Height

Film Cooling and Aerodynamic Performance on Multi-Cavity Squealer Tip of a Turbine Blade

Effects of Squealer Tip Geometry Deviation on Flow Field and Aerodynamic Performance Using Uncertainty Quantification Method and Sensitivity Analysis Method

Effects of Rotor Squealer Tip with Non-Uniform Heights on Heat Transfer Characteristic and Flow Structure of Turbine Stage

An aerothermal analysis of the effects of tip gap height and cavity depth of a gas turbine blade

Aerothermal Optimization of Turbine Cascade Squealer Tip with Non-Uniform Squealer Height

Near Tip Loss Control with a Winglet Baffle Cavity Tip in a Turbine Cascade

Tip Gap Size Effects on Thermal Performance of Cavity-Winglet Tips in Transonic Turbine Cascade with Endwall Motion

Aerothermal Performance of Different Tips in Transonic Turbine Cascade with End-Wall Motion

Numerical Study on Vortex Structures and Loss Characteristics in a Transonic Turbine with Various Squealer Tips

Aero-thermal Performance of Coolant Released from Suction Surface in a High-Pressure Turbine Cascade

Experimental and Numerical Investigations for Dual−Cavity Tip Aerodynamic Performance in the Linear Turbine Cascade

Effects of Suction Surface Near Tip Coolant Injection on the Aerodynamics of Tip Leakage Flow in a High-Pressure Turbine Cascade

Effects of transverse divider wall within the squealer cavity on the performance of a novel squealer tip with rail crown holes for the gas turbine blade

An Investigation on Film Cooling and Aerodynamic Performance of Squealer Blade Tip with Inclined Cavity Bottom

Aerodynamic Effects of an Incoming Vortex on Turbines with Different Tip Geometries

Heat Transfer of Winglet Tips in a Transonic Turbine Cascade

The Tip Leakage Flow of an Unshrouded High Pressure Turbine Blade with Tip Cooling