Abstract:This study describes the outdoor experiments conducted on a photovoltaic/thermal (PV/T) system during the summer months of May and June in the year 2023, in northern India. The main goal of this paper is to reduce the temperature of a photovoltaic (PV) module for effective thermal regulation by implementing a hybrid cooling strategy in a PV/T system. This is achieved by integrating two techniques: multi-walled carbon nanotubes (MWCNT)-water nanofluid as the working fluid for active cooling and paraffin wax as the phase change material (PCM) for passive cooling. Therefore, the present study aims to design, fabricate, and test an innovative thermal collector with a multi-block finned absorber plate positioned beneath the PV module to promote uniform heat transfer distribution and mitigate temperature stratification within each PCM block. The proposed PV/T-PCM system's performance is assessed from energetic, exergetic, economic, and environmental standpoints compared to the PV/T system and conventional PV module. The present study also examines the impact of different concentrations (0.1–0.2 %) of MWCNT and volumetric flow rates (0.5–1.5 l/min) of both water and nanofluids as heat transfer fluids. It is shown that a desirable flow rate of 1.5 l/min yields the most favorable outcomes. The PV/T-PCM (0.2 %) system has been found to exhibit the highest levels of energetic and exergetic electrical and thermal efficiencies, with reported values of 13.25 %, 65 %, 12.81 %, and 1.66 %, respectively. The economic assessment demonstrates that the proposed PV/T-PCM system, integrating water and nanofluid, results in cost savings of 17.41 % and 19.63 % compared to a traditional uncooled PV system. In the context of environmental sustainability, the highest net CO 2 mitigation is estimated to be 18.01 tons for the nanofluid-based PV/T-PCM system. Thus, the results confirm that the proposed PV/T-PCM (0.2 %) system, incorporating a hybrid cooling technique, achieves optimal performance.

A Scalable Phase Change Material-Based System Enhanced by Multi-Walled Carbon Nanotubes and Fins for Efficient Solar Water Heating Applications

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Performance investigation on flat plate solar water collector using a hybrid nano-enhanced phase change material (PCM)

Simultaneously enhanced light absorption and heat transfer capability of melamine foam stabilized phase change composites by carbon black and metal fins for photothermal conversion and storage

Improvement of the efficiency of solar thermal energy storage systems by cascading a PCM unit with a water tank

Efficiency, economic and environmental analysis of solar utilization with high-performance phase change material composites

Experimental and numerical analysis of hybrid nano-enhanced phase change material (PCM) based flat plate solar collector

Enhancing the heat transfer and photothermal conversion of salt hydrate phase change material for efficient solar energy utilization

Performance enhancement of nanofluid-based photovoltaic/thermal system with a novel finned multi-block container of phase change material in the summer season of northern India

A novel bio-based composite phase change material with excellent photo-thermal conversion capability for solar energy harvesting and energy storage

Study on Phase Change Materials' Heat Transfer Characteristics of Medium Temperature Solar Energy Collection System

An Experimental Study to Improve Solar Heating Water Using PCM and Integrated with Helical Heat Exchanger

Experimental study on heat transfer and storage of a heating system coupled with solar flat heat pipe and phase change material unit

Optimization and thermal performance of U-type evacuated tube solar collector filled with phase change material

Studying the Improvement of Solar Collector Mechanism with Phase Change Materials

Sunlight-driven organic phase change material-embedded nanofiller for latent heat solar energy storage

Experimental Study on Phase Change Material with Solar Heater System for Building Heating

Novel composite phase change materials supported by oriented carbon fibers for solar thermal energy conversion and storage

A hybrid photovoltaic and water/air based thermal(PVT) solar energy collector with integrated PCM for building application

A Numerical Study to Improve the Efficiency of Solar Collector used for water heating using Phase Change Material

Investigation on Thermal and Electrical Performance of Late-Model Plate-and-Tube in Water-Based PVT-PCM Collectors