Abstract:In the present work, an innovative asymmetrical evacuated tube compound parabolic collector (CPC) with integrated Phase Change Material (PCM) is proposed as an in-line water heater. This solar collector was examined numerically as regards its thermal and optical operation. The optical efficiency was firstly optimized by modifying two independent design variables of the reflector. Then the optical performance was calculated for the finally selected geometry, considering 15 different transversal incident angles. As regards the thermal operation of the collector, the charging and discharging of PCM were investigated in detail. Four different internal fin arrangements were compared to the no-fin case and each other and the optimum one was revealed. The simulations were conducted for the city of Athens in Greece considering the typical clear day in July. It was considered that there is a charging period of five hours from 09:00 to 14:00 (solar time) and then a discharging one with a duration of one hour. For the thermal optimization, a volumetric flow rate of 4 L/min was selected during the discharging phase. The water temperature from the grid was considered to have a temperature of around 20 °C. The main parameters which were evaluated during charging and discharging were the useful power output, the outlet water temperature and the mean PCM temperature. For validation purposes, experimental results from a previous study were used. In the previous study, a PCM heat exchanger with water as the working fluid was examined experimentally. The same heat exchanger was designed in the present study for comparing the results. It was found that the present numerical results are very close to the experimental of the previous study with a mean deviation of 1.60 % and a maximum of 4.24 %. The design and the numerical simulations were conducted with SolidWorks Flow Simulation software. The final results show that the best design leads to 96 % higher daily useful heat production compared to the baseline case without fins.

Experimental and numerical analysis of hybrid nano-enhanced phase change material (PCM) based flat plate solar collector

Performance investigation on flat plate solar water collector using a hybrid nano-enhanced phase change material (PCM)

Experimental Investigation of the Comprehensive Heat Transfer Performance of PCMs Filled with CMF in a Heat Storage Device

Investigations on an evacuated tube solar water heater using hybrid-nano based organic phase change material

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

A Numerical Study to Improve the Efficiency of Solar Collector used for water heating using Phase Change Material

Experimental and theoretical study for suitability of hybrid nano enhanced phase change material for thermal energy storage applications

Efficiency, economic and environmental analysis of solar utilization with high-performance phase change material composites

Studying the Improvement of Solar Collector Mechanism with Phase Change Materials

Enhancing the performance of paraffin's phase change material through a hybrid scheme utilizing sand core matrix

Optimization of thermal efficiency on solar parabolic collectors using phase change materials - experimental and numerical study

Computational Fluid Dynamics Modeling of a Heat Pipe Evacuated Tube Solar Collector Integrated With Phase Change Material

Numerical Study to Investigate the Performance of U-shaped Flat Plate Solar Collector Using Phase Change Materials (PCMs)

Performance enhancement of nanofluid-based photovoltaic/thermal system with a novel finned multi-block container of phase change material in the summer season of northern India

Numerical study of heat transfer characteristics of phase change materials reinforced with porous media based on hybrid mesh

CFD simulation of a solar collector integrated with PCM thermal storage

Optimization and thermal performance of U-type evacuated tube solar collector filled with phase change material

Energy and exergy analysis with cost-efficiency comparison of modified phase change material (PCM) integrated with solar panel thermal system

Investigation on Thermal and Electrical Performance of Late-Model Plate-and-Tube in Water-Based PVT-PCM Collectors

An innovative asymmetrical CPC with integrated PCM as an in-line water heater

A novel composite PCM for seasonal thermal energy storage of solar water heating system