Abstract:Latent heat storage is one of the most efficient ways of storing thermal energy. Organic phase change materials are latent heat storage materials and they have been widely used as suitable materials for thermal energy storage applications due to their high latent heat and small temperature difference between storing and releasing heat. In this thesis, micro- and nano- scaled phase change materials were fabricated for thermal energy storage. A novel microencapsulated phase change material slurry (MPCS) was introduced by dispersing microencapsulated phase change materials (MEPCMs) into water with an amount of surfactants and its thermal and rheological properties were also investigated. The results showed that MPCS fabricated in the current research are suitable for potential application as heat transfer media in the thermal energy storage. A new methodology was proposed to investigate the heat transfer characteristics of MPCSs. Experiments were carried out in laminar, transition and turbulent flow for MPCSs in a circular tube under constant heat flux, respectively. The experimental results demonstrated that in comparison to water as a heat transfer fluid at the same flow rate, the heat transfer of 10 wt. % MPCS could be enhanced by 10 % in transition flow condition while the PCM particles were in solid/liquid state, and the heat transfer of 5 wt. % MPCS could be enhanced by 21.9 % and 19.2 % in turbulent flow condition while the PCMs are in solid and solid/liquid states, respectively. Nevertheless, the heat transfer enhancement depends on the combination factors, including concentration of the slurry and flow rate of the slurry. A novel heat transfer fluid containing microencapsulated phase change material and multi-walled carbon nanotubes was prepared. The results showed that addition of MWCNTs to microencapsulated phase change material slurry can effectively improve the thermal conductivity of suspensions and it is also found that a blend of 10 wt. % MEPCM and 1 wt. % MWCNTs suspension can achieve the best thermal performance and stability among other blends in the experiment. A novel nanocapsule containing n-octadecane with an average 50 nm thick shell of poly (ethyl methacrylate) (PEMA), and with a core/shell weight ratio of 80/20 was synthesized by direct miniemulsion method. The results showed that PEMA/octadecane nanocapsule had good thermo-physical properties and had much higher encapsulation ratio (89.5%) and encapsulation efficiency (88.9%). For the first time, a novel PCM nanoparticle suspension (nano-PCS) was synthesized by direct miniemulsion method for thermal energy system application. It was found that the nano-PCSs had good thermo-physical properties and durability. All nano-PCSs presented narrow size distribution and stable particles. In comparison to the convectional PCM emulsion and MPCS, the nano-PCS tends to be more stable and is much easier and cheaper to fabricate in terms of the method and materials used, however, the heat transfer characteristics of the nano-PCS require further experimental investigation

Experimental and theoretical study for suitability of hybrid nano enhanced phase change material for thermal energy storage applications

Research on the modification of microencapsulated phase change material for thermal energy storage by nano-SiO2 and graphite

Thermal Energy Storage Performance of Paraffin-Based Composite Phase Change Materials Filled with Hexagonal Boron Nitride Nanosheets

Thermophysical Properties of a Novel Nanoencapsulated Phase Change Material

Experimental Investigation into Heat Transfer Enhancement of Phase Change Material

Experimental Study on Paraffin Wax and Soya Wax Supported by High-Density Polyethylene and Loaded with Nano-Additives for Thermal Energy Storage

Experimental investigation on the performance of binary carbon-based nano-enhanced inorganic phase change materials for thermal energy storage applications

Nano Engineered Paraffin-Based Phase Change Material for Building Thermal Management

Advances in phase change materials and nanomaterials for applications in thermal energy storage

Numerical analysis of nanomaterial-based sustainable latent heat thermal energy storage system by improving thermal characteristics of phase change material

Investigations on an evacuated tube solar water heater using hybrid-nano based organic phase change material

Thermal characteristics enhancement of Paraffin Wax Phase Change Material (PCM) for thermal storage applications

Preparation, thermal and rheological properties of hybrid nanocomposite phase change material for thermal energy storage

Experimental and numerical analysis of hybrid nano-enhanced phase change material (PCM) based flat plate solar collector

Performance investigation on flat plate solar water collector using a hybrid nano-enhanced phase change material (PCM)

Fabrication, Characterization and Thermo-Physical Properties of Micro- and Nano- Scaled Phase Change Materials for Thermal Energy Storage

Experimental and Numerical Studies of Thermal Energy Storage using Paraffin Wax Phase Change Materials

Thermal performance and characterization of phase change material composites reinforced with nano-particles in thermal energy storage systems: a review

Composite Phase Change Material Supported by Cu Nanoparticles@Carbon Porous Matrix for Photo-Thermal Energy Storage

Designing Next‐Generation Thermal Energy Storage Systems with Nanoparticle‐Based Hybrid Phase Change Materials: A Computational Analysis

Preparation and thermophysical property analysis of nanocomposite phase change materials for energy storage